486809

Technisat HD-VISION 40 PVR Manual

20
Zoom out
Zoom in
Previous page
1/72
Next page
keys.
Scroll up or down through the list page-wise with the left/right arrow keys.
> You can obtain additional information on the current broadcasts by pressing the yellow
INFO control key.
> The selected programme is set by pressing the OK key.
6.2.3.1 Select list
In order to facilitate finding programmes, your device has different programme lists available.
You can select your Favourites list or have the programmes displayed in the alphabetically
sorted Complete list or according to Providers
.
> Press the OK key.
The active programme list is now displayed.
> By means of the red Category control key, you can now open a window with the pro-
gramme list types (Favourites list, Provider list, Complete list and Hard disk
recordings).
The active programme list type is marked.
> With the up/down arrow keys you can now select e.g. the programme list type
Complete list and acknowledge with OK.
The alphabetically sorted complete list is displayed, in which all programmes are contai-
ned.
> You can now select the required programme with the arrow keys up/down.
> You can obtain additional information on the current broadcasts by pressing the yellow
INFO control key.
> Press the OK key to confirm.
6.2.4 Calling locked programmes
If a programme is set, that is locked by the parental lock function , the message Enter PIN is
displayed on the screen.
> Use the numeric keyboard to enter your PIN code.
The required programme will be set.
or
> Switching to an unblocked programme.
You will be asked for the PIN code once when switching to a blocked programme, if you have
selected the Once setting in section
8.3.1. To increase operating convenience, you only have
to enter the PIN code once during an operating phase.
Refer to section 6.3.3 if you are using a smart card.
6.2.5 Return to the last set programme
> The last set programme is reset by pressing the Return key on the remote control.
> Press the key once again to reset the programme, that you were watching beforehand.
6.2.6 Infobox
An Infobox with the programme position and the current programme is briefly displayed after
each programme change. Additionally further programme characteristics are displayed, such as
e.g. broadcast teletext and the audio mode.
> In order to display the Infobox manually, press the Info key.
> You can scroll through lengthier information on the current broadcast by pressing the
arrow keys.
> The following programme is displayed, if transmitted, by pressing the Info key again.
> The insert disappears by pressing the Info key again.
20
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 20
Downloaded from www.Manualslib.com manuals search engine
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat HD-VISION 40 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat HD-VISION 40 PVR in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info