486809

Technisat HD-VISION 40 PVR Manual

17
Zoom out
Zoom in
Previous page
1/72
Next page
17
EN
Representation of 4:3 programmes
Programmes, which are broadcast in an aspect ratio of 4:3, can either be displayed in the
original format, always in the 16:9 format or with optimal utilisation of the screen.
> Select how programmes broadcast in the 4:3 format should be displayed with the
up/down arrow keys.
> Acknowledge with OK, to accept the selection and to proceed to the selection of the
available reception signals.
Selection of the reception signals
> Select the available reception signals with the up/down arrow keys.
DVB-S for digital satellite programmes;
DVB-C for digital cable programmes;
DVB-T for digital terrestrial programmes;
Analogue CT for analogue terrestrial and cable programmes; FM Radio for VHF
radio stations).
> Use the right/left arrow keys to determine, whether the marked reception signal is
available at your location (Yes) or (No).
> Then use the up/down arrow keys to select the Continue field and acknowledge
with OK, to accept the selection.
DiSEqC configuration (DVB-S)
In this installation step, you can adapt the settings of your TV set to the configuration of your
satellite antenna.
> If you would like to accept the standard antenna adjustment, use the up/down arrow
keys to mark the Standard field and acknowledge with OK.
In this case, continue with the “Antenna settings (DVB-T)” option.
> If the configuration of your receiving installation does not correspond to the standard set-
tings, select the Manual field and acknowledge with OK.
> Following the detailed description in section 8.5 adapt your antenna settings according
to your receiving installation.
> Then select the Continue field with the arrow keys and acknowledge with OK.
In the next step check the configuration of your antenna again.
> Mark the Yes field using the left/right arrow keys, if you want to save the changes
and then press OK to confirm.
Antenna settings (DVB-T)
If you are used an active DVB-T antenna, which is not equipped with its own power supply, it
can be powered by your TV set via the coax cable. For this purpose, set the antenna power
supply to On.
> With the right/left arrow keys turn the power supply On or Off.
> Use the up/down arrow keys to highlight the Continue entry and acknowledge with
OK.
Software update
Your device now checks, whether new system software is available. You can immediately upda-
te your software, if new software is available. Please note, that this is only possible after a stati-
on search run, if the DVB-S signal is deactivated.
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 17
Downloaded from www.Manualslib.com manuals search engine
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat HD-VISION 40 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat HD-VISION 40 PVR in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info