486809
15
Zoom out
Zoom in
Previous page
1/72
Next page
15
EN
4.5 S-VHS Video cassette recorder/Video camera
If you would like to play back S-VHS video recorder or video camera signals on your television
set, connect the devices to the Video/S-Video inputs on the left rear side of the set.
4.6 HiFi amplifier
4.6.1 Analogue
Connect the Cinch sockets of the back analogue audio output of the television set by a sui-
table cable to an input of your HiFi amplifier (e.g. CD or AUX; Note! The phono-input is not sui-
table!).
4.6.2 Digital
If your amplifier is equipped with an appropriate electrical or optical input (SPDIF), then connect
the digital audio output socket (electrical or optical) to the input of your amplifier.
The sampling rates 32, 44.1 and 48 kHz are available, depending on the respective station.
A Dolby Digital signal (AC3) is also available at this output, if transmitted.
4.7 Sub-woofer
Connect an available active sub-woofer by a suitable cable to the sub-woofer output.
4.8 Serial interface (RS 232)
The RS 232 interface enables updating the system software and pre Programming via the PC.
4.9 USB socket
The USB connection enables updating the system software and pre Programming via the PC or
USB.
4.10 Headphones
If you would like to use headphones, connect them to the headphone connection on the
left rear side of the set.
4.11 PC
If your PC is equipped with a DVI output, we recommend, connecting the PC with a DVI HDMI
cable to the HDMI connection of the television set. Otherwise, please use a VGA cable and
connect the PC to the VGA connection of the television set.
> With help of the 0/AV key of the remote control switch the TV set to VGA or HDMI
playback.
The switchover should be accomplished automatically when connecting via a DVI-HDMI
cable.
You should configure the resolution of the graphics card before connecting the PC to the televi-
sion in such a way, that the format corresponds to a format supported by the television.
You can find the supported formats in the technical data (Section 15).
E.g., the resolution 1024*768@60Hz is supported.
To set a specific resolution for your graphics card please read the operating system instructions
of your PC. You can normally find this setting Windows in the menu Start -> Settings -> System
control -> Display ->Settings.
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 15
Downloaded from www.Manualslib.com manuals search engine
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat HD-VISION 40 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat HD-VISION 40 PVR in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info