144270

Technisat hd vision 32 pvr Manual

46
Zoom out
Zoom in
Previous page
1/72
Next page
If the pin query mode has been set to Once or Always and the PIN has not yet been chan-
ged, you will be asked to change the PIN. Proceed as described in Section 8.3.2.
Always
The main menu, the locked programmes as well as the locked hard disk recordings are always
locked in the setting Always.
Once
In the setting Once, the PIN must only be entered once to call the main menu, the locked pro-
grammes and the locked hard disk recordings during one operating phase.
Off
The parental control function is not active, when the setting is on Off.
8.3.2 Changing the device pin
The device PIN code was set to 0000 in the factory. To modify the device PIN code proceed
as follows:
> Use the up/down arrow keys to select the change Device PIN line and then press
OK to confirm.
> First use the numeric keyboard to enter the currently valid device PIN-Code.
The marking the chance to the enter New PIN line.
> Enter the new device PIN code by means of the numeric keyboard.
The marking now jumps to the repeat New PIN line.
> Use the numeric keyboard to enter the new PIN code again, to confirm it.
> Acknowledge the final note with OK.
Note!
Ensure that you never forget the device PIN code. If this is the case however, please ask your
specialised dealer for help!
8.3.3 Selecting TV stations / Radio stations
> Select the Select TV station or Select radio station line with the up/down
arrow keys.
> Acknowledge with OK.
A window is now displayed to select the TV programmes or radio programmes. The
favourites list is displayed in the right half of the picture. The currently set programme is
marked in the favourites list. The alphabetically sorted provider list is displayed on the
left side of the screen.
> Now use the arrow keys to select the programme you want to block.
> Pressing the yellow control key blocks the programme.
The child protection symbol is displayed next to the selected programme.
> Proceed as described above to unlock programmes by highlighting the appropriate pro-
gramme and removing the child lock by pressing the yellow control key.
Selecting blocks
In order to select several programmes at the same time proceed as follows:
> Press the OK key to jump to select mode.
The selected programme is highlighted in blue.
> Use the arrow keys to additionally select the following/previous programmes.
46
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 46
Downloaded from www.Manualslib.com manuals search engine
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat hd vision 32 pvr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat hd vision 32 pvr in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat hd vision 32 pvr

Technisat hd vision 32 pvr Specifications - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info