144270

Technisat hd vision 32 pvr Manual

47
Zoom out
Zoom in
Previous page
1/72
Next page
> After selecting the required programmes as described, press the yellow control key to
block the selected programmes.
Selecting the provider list
> If you would like to take a look at the programme of a provider, press the red Provider
list control key..
The marking jumps to the left half of the picture to the provider overview.
> Use the arrow keys to select the required provider and acknowledge with OK.
The marking now jumps back to the right half of the picture. The favourites programme
list of the selected provider is now displayed. The programmes are marked with the
appropriate programme position numbers.
Exiting station selection
> After you have selected the station or rejected the selection, press the Return key to
return to the parental control menu.
> Return to normal operation by pressing the Menu key.
8.3.4 Switch-on safety lock
Your device is additionally equipped with a switch-on safety lock. The device can only be swit-
ched on with the remote control, if this is activated. The device cannot be switched on by actua-
ting the device keys.
Activated the switch-on safety lock
> Press the Option key for approximately 2 seconds until the insert “Switch-on safety
lock activated ” followed by “ Switch to standby” is displayed.
> Switch the device to the standby mode.
Deactivating the switch-on safety lock
> Turn the television set on with the remote control, the switch-on safety lock is now deac-
tivated.
8.4 Programming the electronic programme guide
Your receiver can receive data channels with additional SFI data. This enables an SFI
preview for up to one week in advance.
During satellite reception, you receive this data channel from the ASTRA satellite system (19.2°
East). In order to also receive the appropriate data channel via DVB-C or DVB-T, this must be
available in your cable network or DVB-T reception area.
> Call the main menu by pressing the menu key.
> Select the Settings line with the up/down arrow keys.
> Acknowledge with OK.
The Settings sub-menu is displayed.
> Select the Programme guide line with the up/down arrow keys.
> Acknowledge by pressing the OK key.
The programme guide menu is displayed.
47
EN
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 47
Downloaded from www.Manualslib.com manuals search engine
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat hd vision 32 pvr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat hd vision 32 pvr in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat hd vision 32 pvr

Technisat hd vision 32 pvr Specifications - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info