09 DW
Channel monitoring with activated radion function - On / Off
While the radio is on, the selected channel is monitored. Upon reception of a signal, the radio is
deactivated until the signal disappears.
10 LAMP
Illumination of the LCD - OFF / KEY / CONT
OFF : no illumination
KEY : after entry, the display is illuminated for 5 seconds
CONT : illumination is constantly on
11 LOCK
Key lock
settings: - K + S / PTT / KEY / ALL
Press the keylock key (keypad, lower row to the right) to activated or deactivate the keylock
function. The activated state is indicated by a key symbol in the upper left corner.
K + S : all key of the keypad, as well as the channel selection keys are locked - PTT key, as
well as the monitor and programmable function keys are activated
PTT : transmission is blocked - the display shows P LOCK
KEY : all keys of the keypad are locked - channel selection keys, as well as PTT, monitor
and programmable function keys are activated
ALL : all functions are locked
12 MSGSET
Programming of the welcome message that appears shorty after turning on the radio
5 symbols are available:
a) blank character,
b) the digits 0 - 9,
c) the letters A- Zand
d) the symbols asterix *,underscore _and plus +.
Select the symbols with the channel selection keys.
To proceed to the next space press the number key 9. To move the cursor backwards press the
number key 7.
To delete the actual entry press the V/M key (keypad, lower row left side).
13 NAME
display types are FREQ and ALPHA
ALPHA : The programmed frequency is displayed as a channel number, e.g. CH - 001.
FREQ : The programmed channel name is displayed. If no channel name is programmed,
the channel number is shown.
14 NM SET
Channel Name -
Programming of the welcome text that appears after turning the radio on. The text message can
contain a maximum of five symbols composed out of :
a) blank character,
b) the digits 0 - 9,
c) the letters A- Zand
d) the symbols asterix *,underscore _and plus +.
Select the symbols with the channel selection keys.
To proceed to the next space press the number key 9. To move the cursor backwards press the
number key 7.
To delete the actual entry press the V/M key (keypad, lower row left side).
15 OFFSET
not available
16 OPN MSG
temporary message after turning the radio on - OFF / MSG / DC
OFF : no message text is displayed
MSG : in 12 MSGSET programmed text is displayed
DC : voltage of the battery pack
17 PSWD
password protection - On / Off
Requires entry of the programmed password if function is activated. The password is program-
med via software or directly at the radio via the menu function 18 PSWD W.
The radio cannot be operated if the correct password is not entered.
A forgotten password can be retrieved via software.
18 PSWD W
password creation
Create a 4-digit password out of the numbers 0 - 9. Confirm your entry by pressing the Fkey
(keypad, lower row right side).
To delete the entry press the V/M key (keypad, lower row left side).
19 ROGER
roger beep - On / Off
In the activated state, the three-tone roger beep is sent after release of the PTT key (9).
20 SCN MD
there are three scan modes available :
TO : Time-Operated-Scan
Is an occupied channels scanned, remains the radio for a certain period of time, which is
programmable via software, on this channel before scanning is continued regardless if the
signal is still present or not.
CO : Carrier-Operated-Scan
The radio remains on an occupied channel until the signal ends. Then, scanning continous.
SE : Search-Scan
Is an occupied channel scanned, stops the scan function and the radio remains on this channel.
22 23
EnglishEnglish
