487285

Team SIS 9 Manual

13
Zoom out
Zoom in
Previous page
1/40
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don‟t change
the page numbering. Keep the language integrity.
13 TEAM SIS 9 - 071121
Assembly page 13/40
Fax +32 2 359 95 50
STEAM-IRONING
As indicated on the temperature dial (4) and the table, steam ironing is only possible at
higher ironing temperatures, so set the dial to or .
Fill the water tank with water and insert the mains plug into a wall socket.
Set switch of the water tank (1) to the on position ("1"). When the "steam available" pilot
light (2) ( ) illuminates, it means that the water in the water tank has reached the
temperature necessary for steam-ironing.
The iron heats up faster than the steam tank. Hence you can turn the temperature dial of
the iron a few minutes after having switched on the steam tank.
Select the required ironing temperature with the temperature dial (4). The pilot light (13)
will come on. After a few minutes, pilot light (6) will go out. This indicates that the soleplate
has reached the set temperature.
Press the steam button (8) to release bursts of steam from the soleplate of the iron. Release
the button and the steam will stop. If you want a continuous jet of steam, slide the locking
button (7) of the steam button backwards till it blocks the steam button. To stop the
steam, slide the locking button (7) of the steam button forwards.
During steam ironing, the pilot light (6) will come on from time to time. When this happens,
the iron is being heated-up to the required temperature. You can continue ironing.
When you use a lot of steam in a very short time, the steam output is lightly reduced until
your appliance produces enough steam to reduce the difference. This phenomenon also
happens when there isn‟t enough water in the water tank.
When the water tank is empty, it is impossible to use steam. When this happens, the
appliance might be a bit noisier than when the tank is full. This is normal and does not
indicate any defect or malfunction.
STEAMING IN A VERTICAL POSITION
You have to hang the cloth you want to smooth out avoiding the creases and place the iron in
a vertical position at a few centimetres from the piece of cloth. Then move the iron by pressing
the burst of steam button.
DRY IRONING
For ironing without steam, do not press-in the steam button (8)
You may switch off the steam tank by setting switch (1) to the off position ("0")
WHEN FINISHED IRONING
Put the switch of the water tank (1) in off position ("0") and turn the temperature dial to
"MIN".
Remove the mains plug from the wall socket and let it cool down.
It is not necessary to pour the remainder of water out of the steam tank.
We recommend placing the iron on its base when you store it. The therefore foreseen
place is non-slip and won‟t damage the soleplate of the iron.
CLEANING
The plastic parts of the appliance can be cleaned with a damp cloth.
Never use abrasive products. To clean the soleplate of the iron, you will also find specific
products in the shops. Please also read the instructions of use.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team SIS 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team SIS 9 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Team SIS 9

Team SIS 9 Additional guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info