587255
62
Zoom out
Zoom in
Previous page
1/68
Next page
Mixer
• Select the Groups tab at the bottom of the screen. Click on the output field at the
bottom of the group channel. Select Stereo Outs and choose a pair of outputs for
your Group.
Monitoring While Recording
Another useful feature of the mixing engine is to monitor tracks while recording. During a
live event, the X-48 can serve as a 48-track recorder as well as your monitor mixer. Connect
your mic preamps to the (optional) analog inputs and connect the S/PDIF output to a D/A
converter or 2-track recorder, like the TASCAM DV-RA1000HD. You can then monitor
through the D/A convertor or recorder using headphones or monitors. To set up the X-48 for
record monitoring:
• Make sure Mixer Bypass is disabled, see previous section.
Check your channel strips to make sure the MIX button is on/green so that tracks are
being routed to the stereo mix out.
Click on the Masters tab at the bottom of the screen.
• Click the Output field on the Master channel on the right side of this window. This
opens a menu of options. Mouse over the Stereo Outputs submenu and choose
SPDIF.
Connect the S/PDIF digital out to the S/PDIF digital in on your D/A converter or
recorder. Change the on-screen mixer channels to mix. Since the mixer is after the
recorder, any changes made to the monitor mix will not affect the recording.
Final Mix
It is possible to complete your project entirely inside the X-48. You can insert VST plug-ins,
add EQ and compression and automate channel levels during mixdown. You'll still need a
master recorder to monitor and capture the final mix, like the TASCAM DV-RA1000HD.
To mix on the X-48:
• Click the Output field on the Master channel on the right side of this window. This
opens a menu of options. Mouse over the Stereo Outputs submenu and choose
SPDIF.
Make sure that the Mix button is on/green for any tracks/channels you want to go to
the Master out.
Connect the S/PDIF digital out to the S/PDIF digital in on your D/A converter or
recorder. Change the on-screen mixer channels and DSP settings to mix your project.
62
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info