587255
61
Zoom out
Zoom in
Previous page
1/68
Next page
Mixer
Third-Party Plug Ins
The X-48 officially supports Waves plug-ins and Antares Auto-Tune plug-in. Other plug-ins
have not been tested and may result in undesired operation, requiring the X-48 be reloaded
from the factory restore CD.
To install plug-ins, do one of the following:
Insert the installer CD in the X-48. If there's an autorun.exe file on the CD, just
follow the prompts as you would on a computer. Install the plug-ins in
D:\FreewareVST
• Use the Launch External Application command in the File menu to run the installer
on the CD, then follow the prompts. Install the plug-ins in D:\FreewareVST
Both Waves and Antares require an iLok dongle for copy protection. Authorize the dongle
on a computer then plug it into the X-48's USB jack when prompted by the plug-in installer.
CPU Meter
The CPU meter is located at the top of the screen. It displays a bargraph and a percentage of
CPU used. As you use EQ, dynamics and VST plug-ins, the CPU meter will begin to rise. If
the X-48 displays errors and has trouble playing back tracks, try disabling some of the
inserted effects. It is strongly recommended that VST effects only be used during mixdown,
not during recording, in order to avoid their added latency and CPU load.
Routing
Each recorder track goes directly to the mixer channel that has the same number as the track.
Mixer channels can be routed to various destinations, like physical outputs or Groups. Click
the bottom-most text display on a mixer channel to reveal a menu of output routing choices,
or open the DSP View to see the same menu along with other parameters of that mixer
channel. You can change the output to a group or pair of outputs for submixing use, see the
next section for examples.
Mixer Applications
Submixing
One of the typical uses for the subgroups is to combine tracks when you don't have enough
mixer inputs for your session. For example, 17 tracks of percussion can be combined into a
stereo group then sent through a pair of outputs to come up on a pair of faders on your
console. To use this feature:
• Make sure Mixer Bypass is disabled, see previous section.
Click on the tab at the bottom of the screen where your tracks are, such as Ch. 1-24.
Find your track in the mixer view. You can change the level, pan it left or right, add
EQ, etc.
• Click the Output field at the bottom of the channel strip. This opens a menu of
options. Mouse over the Groups submenu and choose a stereo group from 1 to 12.
61
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info