587255
24
Zoom out
Zoom in
Previous page
1/68
Next page
Configuration
Front Panel Operation
To configure the I/O cards from the front panel:
• Press the INP 1-24 or INP 25-48 key
Use the Up/Down buttons to select a bank of 8 inputs and outputs, i.e. "IO Card
Select 1-8" and press CHNG.
• Select either TDIF 1-8 or Slot1 (1-8) and press ENTER.
• Press the EXIT button when you are finished changing physical I/O types
To send a different bank of inputs to tracks, for example send inputs 1-24 to 25-48 (see
example above):
• Press the INP 1-24 or INP 25-48 key
Use the Up/Down buttons to select routing for a bank of tracks, such as "Input
Routing 25-32" and press CHNG.
Select a bank of inputs, i.e. Input Grp1 1-8 and press ENTER.
• Press the EXIT button when you are finished changing input groups
Analog I/O Operating Level
You can set the Analog Operating level from the Settings menu. Choose Settings from the
Window menu, click the I/O tab and click the I/O Operating Level from the pull-down
menu. Your choices are -9, -14, -16, -18 or -20dBfs.
Control Mode
The X-48 has four options for transport control:
Internal – The default is local control from the transport, mouse and keyboard
SMPTE – When enabled and the front panel TC CHASE key is enabled, the X-48 chases
the SMPTE timecode from its input jack.
MIDI (MTC) – In this mode with the front pantl TC CHASE key enabled, the X-48 chases
incoming MIDI timecode from it's MIDI input.
Theater Play – This is a special playback mode similar to Auto Cue on a CD Player. Please
refer to Page 49 for details on the use of this mode.
MIDI Device ID
When working with MIDI Machine Control, you can set a MIDI device ID so that other
devices don't intercept commands for the X-48 (and vice-versa). To set the MIDI device ID:
Mouse/Keyboard Operation
Click the Windows menu, select Settings and click the System tab
• Click the MIDI Device ID pulldown
Select a device ID from the list
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info