Manual Tascam X-48 (page 23 of 68) (English)

587255

Zoom out

Zoom in

1/68

Configuration

digitally connected to the S/PDIF output of a piece of equipment when transferring stereo

audio into the X-48.

TDIF Port 1 – When selected, the X-48’s digital audio clock will be locked to the digital

audio signal present at the first TDIF port (1-8). This would typically be used when the X-

48 is digitally connected via TDIF to one other piece of equipment such a mixer or another

recorder.

Resolve to Video In – When checked, the X-48 will align the frame edge of its timecode

with the edge of the video reference signal. This is not used as a sample clock source.

Check this box when the X-48 is synchronized via time code to devices such as video

recorders, cameras, or edit controllers and all devices are locked to the same video reference

signal (a.k.a. Blackburst). For more information on synchronization and working with film

or video, please see the section in Chapter 3, "Video Clock Frame-Edge Resolve."

I/O Settings

This section explains how to configure the optional I/O cards for the X-48:

Mouse/Keyboard Operation

Choose Settings from the Windows menu and click on the I/O tab:

I/O Cards – At the top of the display, you'll see a list of installed optional I/O cards (if any)

I/O Setup – Using the I/O Card Select menus, you can select Input and Output types in

groups of eight from the selection pull down menus. (They are all set to TDIF by default.)

The Input Routing pull down menus set track input sources in groups of eight. They can be

used to configure the recorder inputs for a console that has less than 48 routing outputs.

For example, a console with 24 TDIF outputs could be connected to the X-48 this way:

• Connect console TDIF outs 1-24 to X-48 TDIF in 1-24

• Set Input Routing for channels 1-8 and 25-32 as Input Group 1 1-8

• Set Input Routing for channels 9-16 and 33-40 as Input Group 2 9-16

• Set Input Routing for channels 17-24 and 41-48 as Input Group 3 17-24

This allows all 48 tracks to receive signal without physical re-patching. Console out 1 will

feed track 1 and 25, console out 2 will feed tracks 2 and 26, etc. There is a track-by-track

input selection pull down menu in the Edit/Track screen which over-rides the selection made

in the Settings window.

You can also select the

I/O operating level from the pulldown menu at the bottom of the

window. See the next section for more information.

S/PDIF – A checkbox at the bottom of the window enables sample rate conversion on the

S/PDIF input

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam X-48 Manual

Product: