587255
26
Zoom out
Zoom in
Previous page
1/68
Next page
Configuration
Press the Up/Down buttons to select Resolve to Video In and press CHNG
Use the Up/Down buttons to select On and press ENTER
The Video Clock input supports Tri-Level Sync for High Definition Video. If the blackburst
input is Tri-Level, the X-48 automatically enables this feature. See Chapter 3, Recording for
more on sample clock and video sync.
Pull Up/Pull Down Sample Rates
The X-48 supports pull-up and pull-down sample rates for use in film and video post-
production. When you select the sample rate for the new session, be sure to consider the
final delivery format and set your sample rate accordingly. See Chapter 3, Recording for
more on sample rates.
Networking
The X-48 can be connected to a computer using the fast Gigabit Ethernet connection. You
need an Ethernet crossover cable to connect your computer to the X-48, unless you know
that your computer's Ethernet connector is "auto-sensing" (such as most modern Apple
computers). Once the ethernet cable is connected, you need to configure both the X-48 and
your PC for networking:
To configure the X-48 for networking:
Mouse/Keyboard Operation
View the "Settings" window, "System" tab.
Press the "Configure..." button.
Select "Use the following IP address".
Set "IP address" to be 192.168.1.1. If this address is already in use by your router,
choose a different number for the last digit.
Set "Subnet mask" to be 255.255.255.0.
Leave the "Default gateway" blank.
"Use the following DNS server addresses:" should be already selected.
"Preferred DNS server" and "Alternate DNS server" should be blank.
• Press OK.
Begin sharing the X-48's hard drive by selecting "Drive Sharing..." from the File
menu.
To configure your Windows XP computer for networking to the X-48:
Select Start->Control Panel->Network Connections.
You should see a list of network connections, with one called "Local Area
Connection".
Right-click on "Local Area Connection" and select "Properties".
Click on "Internet Protocol (TCP/IP)" so that it is highlighted. (Its check box must
remain checked.)
Press the "Properties" button.
Select "Use the following IP address".
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info