617917

Tascam SS-CDR200 Manual

72
Zoom out
Zoom in
Previous page
1/84
Next page
72 TASCAM SS-CDR200/SS-R200/SS-R100
Setting the analog output attenuation
function
If sound distorts from an output destination device at
maximum output level, you can use this unit's analog
output attenuation function, which lowers the output
level, to stop distortion.
1. Press the MENU [JOG] button to open the
MENU
screen.
2. Open the
UTILITY
menu screen.
3. Select the
A. OUT ATT.
item.
4. Press the MULTI JOG dial or ,[LOCK] button (or
remote control ENTER or t button) to move the
cursor right and select the setting value.
5. Turn the MULTI JOG dial (or press the remote control
5 and b buttons) to set the attenuation level.
Range: 0dB (default) – −14dB (in 1dB increments)
7. After you complete the setting, press the HOME/
DISPLAY button to return to the Home Screen.
NOTE
The analog output attenuation function setting is retained even
when the unit is off.
Viewing information about the media
You can view information about the media in the current
device.
Follow these steps using the menu to access this
information.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
UTILITY
menu.
3 Select
INFORMATION
.
4 Press the MULTI JOG dial (or remote control ENTER
button) to show information about the media,
including its total capacity and open capacity, in
the current device.
Example when the current device is USB/SD/CF
Example when the current device is CD
5 When you have finished viewing the information,
press the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
Restoring the factory settings
You can restore all the settings that are stored in the unit’s
backup memory to the settings they had when shipped
from the factory.
Follow these steps using the menu to restore the settings.
NOTE
The factory settings cannot be restored if media is loaded
in the current device. Change the current or remove the
media from it and conduct the operation again.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
UTILITY
menu.
3 Select
FACTORY PRESET
.
NOTE
The screen above is an example from an SS-CDR200 or
SS-R200 unit. The SS-R100 does not have the
5.RS-232C
menu item.
4 Press the MULTI JOG dial (or remote control ENTER
button).
A confirmation pop-up message appears.
5 Press the MULTI JOG dial (or remote control ENTER
button) again to restore the unit settings to their
factory defaults. A
COMPLETE
pop-up message
appears briefly when resetting finishes.
6 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
12 − Other settings and media information
… 72 …


Need help? Post your question in this forum.

Forumrules
1

Forum

tascam-ss-cdr200

Reset search

  • Dear sir.
    I have problem on both tascam sscdr 200 on the time display that after doing the setting before the recording into the pendrive that after done the rec, it appears the wrong time of at what time it started the recording example i set it at 1am and it appears at 2am.
    Is there a way to resolve this?
    Same thing also in the sscdr250N Submitted on 30-10-2023 at 10:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR200 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info