617917

Tascam SS-CDR200 Manual

70
Zoom out
Zoom in
Previous page
1/84
Next page
70 TASCAM SS-CDR200/SS-R200/SS-R100
Erasing tracks
You can erase tracks that have been recorded in audio CD
format on a CD-RW disc. The specified track and all later
tracks (until the last track on the disc) will be erased.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
CD
menu.
3 Select
ERASE
.
4 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the
Erase Track
item.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select
Erase Track
.
6 Press the MULTI JOG dial (or remote control ENTER
button) to enable selection of the first track in the
range of tracks that will be erased.
7 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select the first track
to erase in the range of tracks that will be erased.
In the example above, track
03
is selected.
The last track to be deleted (shown as
03
in the
illustration above) is fixed as the last track of the disc
and cannot be changed.
8 After you have selected the first track, press the
MULTI JOG dial (or remote control ENTER button).
A confirmation pop-up message appears.
9 Press the MULTI JOG dial (or remote control ENTER
button) again to start erasing tracks.
-- ERASE --
and a progress bar appear in a pop-up
while tracks are being erased.
After the tracks have been erased, the
CD
menu will
reopen.
NOTE
•
When erasing tracks on a finalized CD-RW disc, the unit
will unfinalize the disc before erasing the designated
tracks.
•
This operation can be executed only on a disc that has
audio CD format files
Refreshing discs
You can refresh (completely erase) a CD-RW disc. The unit
might not be unable to recognize a CD-RW disc in some
cases, such as if finalization was interrupted by a power
failure, or if a disc has been used by a computer. In such
cases, follow these procedures to refresh the CD-RW disc
so that the unit can recognize it.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
CD
menu.
3 Select
ERASE
.
4 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the
Refresh
item.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select
Refresh
.
6 Press the MULTI JOG dial (or remote control ENTER
button).
A confirmation pop-up message appears.
7 Press the MULTI JOG dial (or remote control ENTER
button) again to start refreshing the CD-RW disc.
-- REFRESH --
” and a progress bar appear in a
pop-up while the disc is being refreshed.
After the CD-RW disc gas been refreshed, the
CD
menu
will reopen.
11 − CD-RW management (SS-CDR200 only)
… 70 …


Need help? Post your question in this forum.

Forumrules
1

Forum

tascam-ss-cdr200

Reset search

  • Dear sir.
    I have problem on both tascam sscdr 200 on the time display that after doing the setting before the recording into the pendrive that after done the rec, it appears the wrong time of at what time it started the recording example i set it at 1am and it appears at 2am.
    Is there a way to resolve this?
    Same thing also in the sscdr250N Submitted on 30-10-2023 at 10:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR200 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info