617917
71
Zoom out
Zoom in
Previous page
1/84
Next page
TASCAM SS-CDR200/SS-R200/SS-R100 71
Footswitch control
You can operate this unit using a TASCAM RC-3F
footswitch (sold separately) connected to the front panel
REMOTE jack.
TASCAM RC-3F
Footswitch
(sold separately)
Setting up a footswitch
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
UTILITY
menu.
3 Select
RC-3F MODE
.
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor to the right and select the setting item.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select one of the
three pedal assignment modes.
Options:
MODE 1
(default value),
MODE 2
,
MODE 3
6 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
NOTE
The footswitch (RC-3F MODE) setting is retained even
after the power is turned OFF.
Using the footswitch
When pushed, each of the footswitch pedals will operate
according to the setting made with the
RC-3F MODE
item.
Footswitch mode functions
The functions of the footswitches in each mode are as
follows.
MODE
Footswitch
L (press) C (press) R (press)
L (press and
hold)
C (release) R (press and
hold)
1
.
PLAY
/
m
READY/STOP
,
2
.
PLAY/PAUSE
/
m
,
3
PITCH (–) PLAY/PAUSE PITCH (+)
MODE 1: Optimal for transcribing meetings and working
with similar recordings
MODE 2: Basic transport control
MODE 3: Pitch control
Setting the digital output format
The digital output format of this unit can be set to either
SPDIF
or
AES/EBU
.
Use the menu as follows to set it.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
UTILITY
menu.
3 Select
DIGITAL OUT
.
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor to the right and select the setting item.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to set the digital output
format.
Options:
SPDIF
(default value),
AES/EBU
6 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
NOTE
The DIGITAL OUT setting is retained even after the power
is turned OFF.
12 − Other settings and media information
71


Need help? Post your question in this forum.

Forumrules
1

Forum

tascam-ss-cdr200

Reset search

  • Dear sir.
    I have problem on both tascam sscdr 200 on the time display that after doing the setting before the recording into the pendrive that after done the rec, it appears the wrong time of at what time it started the recording example i set it at 1am and it appears at 2am.
    Is there a way to resolve this?
    Same thing also in the sscdr250N Submitted on 30-10-2023 at 10:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR200 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info