617900

Tascam HS-P82 Manual

45
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM HS-P82 45
Level knob: Touch the knob to adjust the level sent to the
stereo bus. When its background color turns yellow, use
the DATA dial to adjust it. Setting values range from “–∞”
dB –
+10
dB. (Default setting:
0dB
)
Pan pot knob: Touch the knob to adjust the stereo position
of the signal sent to the stereo bus. When its background
color turns yellow, use the DATA dial to adjust it. Setting
values range from
L100
to
R100
with
C
as the center
value. (Default setting:
C
)
Level meter: During playback, the meter shows the
playback level. For tracks that have the record function
ON and are not playing back, the meter shows the input
signal level.
The area at the bottom of the level meter shows the track
name (4 characters or less) and acts as a record function
indicator. If the MIC/LINE selection switch for the
current channel is set to MIC 0 or MIC –25, the name
area momentarily shows the gain value when you turn
the input trim knob. If the input source is set to a digital
and there is no signal on the corresponding digital input
or the input signal differs from the unit setting, the
channel meter display appears gray and the following
messages appear.
If there is no corresponding input,
•
AESx-x
NO
SIGNAL
.
If the input signal differs from the settings made in the
•
unit,
AESx-x
UNLOCK
.
If the Cbit information of the input signal is no audio,
•
AESx-x
NOT
AUDIO
.
If the Cbit information of the input signal is non
•
professional,
AESx-x
NOT
PRO
.
If other Cbit information of the input signal differs
•
from actual operation mode,
AESx-x
Cbit
ERROR
.
Channel name button: Touch this button at the lower right
of the screen to edit the name of the channel.
˙ or ¥ button: Touch this button to open the setting screen
of the next channel.
When channels are linked, the screen appears as follows.
The channel setup screen for the stereo (L/R) channel has
fewer options and appears as follows.
Level meter settings (METER SETUP)
Make level meter settings on this screen.
Peak Hold Time knob: Touch this to set the peak hold time.
Use the DATA dial to adjust the time. The setting values
are 0 sec, 1 sec, 2 sec and inf (hold forever). (Default
value:
1 sec
)
Release Time knob: Touch this to set the release time. Use
the DATA dial to adjust the time. The setting values are
Slow
,
Normal
and
Fast
. (Default setting:
Normal
)
Over Level knob: Touch this to set the level at which the
overload indicator lights (the amount in dB below the
maximum level). Use the DATA dial to adjust the level.
The setting value range is
–0.20
dB
(default value),
–0.17
dB
,
–0.13
dB,
–0.10
dB,
–0.06
dB,
or
–0.03
dB
.
These settings are reflected in the Audio Over setting of
the Auto Marker item on the OPTIONS page of the REC
SETUP screen.
Ref. Level Line button: Touch to turn the reference level
line ON or OFF. (Default setting:
ON
)
NOTE
If you press the EXIT/CANCEL [PEAK CLEAR] key when the
Home Screen is open, the peak hold display resets.
6 – Internal Settings and Operations
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info