617900
43
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM HS-P82 43
Use the number buttons to input the start time for the time
code generator.
If you begin input without selecting a digit, input will occur
in order from the smallest place.
Touch a digit to select it for input. When selected, the digit’s
background color becomes yellow. Use the number buttons
for the DATA dial to enter two digits at a time.
Touch the
ENTER
button to confirm.
Touch the
CLEAR
button to reset the values to 0.
TIP
You can use a PS/2 keyboard to set these values. Press the ESC
key to reset all the digits to 0.
Mixer settings (MIXER SETUP)
Make mixer settings on this screen.
The
MIXER SETUP
screen has 3 pages:
INPUT
,
SIGNAL
PROCESSING
and
SETUP
. Touch the tabs at the bottom of the
screen to open the corresponding page.
INPUT page
Make input settings on this page.
INPUT SOURCE
Set the input source for each channel (A1–A8: analog
inputs, D1–D8: digital inputs). (Default settings:
A1
A8
)
PHANTOM POWER +48V
Turn the phantom power for each input ON or OFF.
(Default settings: all
OFF
)
Fs CONVERT
Turn the sampling rate converter ON or OFF for each
pair of inputs. (Default settings: all
OFF
)
NOTE
You cannot turn Fs CONVERT ON for the digital input selected
for the master clock.
Press a channel button on the top line to open the
corresponding
CHx
SETUP
screen.
SIGNAL PROCESSING page
Turn phase inversion, low-cut filters and limiters ON and
OFF on this page.
PHASE (ø buttons)
Touch these buttons to turn phase inversion ON or OFF
(The phase is fixed at 180º). (Default settings: all
OFF
)
Low Cut Filter
Touch these to turn the low-cut filter ON or OFF. Touch
the
LowCut
Filter
button to open the
LOW
CUT
FILTER
setting screen. (Default settings: all
OFF
)
LIMITER
Turn the limiter ON and OFF. (Default settings: all
OFF
)
Press a channel button on the top line to open the
corresponding
CHx
SETUP
screen.
LOW CUT FILTER (button)
Touch the
LowCut
Filter...
” button on the
SIGNAL
PRO-
CESSING
page of the
MIXER
SETUP
screen to open the
LOW
CUT
FILTER
screen.
ON/OFF
Turn the low-cut filter ON or OFF. (Default settings: all
OFF
)
FREQ
Touch the knob for the cutoff frequency that you want to
adjust. Use the DATA dial to adjust it. The setting values
are
40Hz
,
80Hz
(defaule) and
120Hz
.
6 – Internal Settings and Operations
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info