617907
66
Zoom out
Zoom in
Previous page
1/132
Next page
66 TASCAM HS-2
Making a recording
Recording
When unit is stopped, press the REC key to put the
unit into recording standby. At this time, the icon
indicates this transport status.
In recording standby, press the PLAY key to start
recording.
The transport status display at the top left of the Home
Screen changes into the recording status display and part
of the background of the Home Screen becomes red,
indicating that the unit is recording. The time counter
starts at the same time.
NOTE
When stopped, pressing the PLAY key while pressing
and holding the REC key will also start recording.
NOTE
Recording can also be controlled using parallel control
(except retaking).
In take mode, even if you press the PLAY key while
holding the REC key during playback, you cannot
overwrite a recording.
CAUTION
When in recording standby, the parallel control signals
output are high for TALLY_RECORD and low for TALLY_
PAUSE. When in recording standby, the REC and PAUSE
keys on the front panel will be lit.
Stopping recording
To stop recording, press the STOP (RETAKE) key.
Retaking a recording
Press the STOP (RETAKE) key while pressing and holding
the SHIFT key to erase the last recorded take. (The
recorded audio file itself will be erased.)
If you press the PAUSE key during recording to record
multiple consecutive takes (files) and the
PAUSE MODE
item is set to
SPLIT
, this will only erase the last take. If it
is set to
NO SPLIT
, the recording is not split into multiple
takes, so this will erase the entire recording from start to
finish.
For details about the
PAUSE MODE
item see “FILE FORMAT
page” on page 90.
Playback
Project/session/take selection
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
NOTE
You can also touch the session/take name area on the
Home Screen to open the
PROJECT
screen.
2 Touch the e button for the project that contains
the take you want to load to open the session se-
lection screen. If it is not the current project, a pop-
up window appears confirming that you want to
load it. Touch the
OK
button.
3 Touch the e button for the session that contains
the take you want to load to open the take selec-
tion screen. If it is not the current session, a pop-
up window appears confirming that you want to
load it. Touch the
OK
button.
8–Take mode
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info