617907

Tascam HS-2 Manual

64
Zoom out
Zoom in
Previous page
1/132
Next page
64 TASCAM HS-2
In this chapter, we explain how to use the take mode. To
use this unit in take mode, set the unit’s operation mode
to TAKE MODE. (See “Selecting the operation mode” on
page 44.)
Please refer to “4–Basic operation” on page 29 when reading
this chapter.
Preparing to record
Basic preparations
Refer to“4–Basic operation” on page 29 and make the basic
preparations for recording.
Creating a new project
Create new projects as necessary. You do not need to
create a new project if you plan to record into an existing
one.
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
2 Touch the
CREATE PROJECT
button on the
PROJECT
screen to open the
CREATE PROJECT
screen.
On this screen, set the project name, the name for the
first session and the sampling frequency.
Touch the
NEXT
button to open the next page.
Set the frame type then bit length.
Touch the
NEXT
button to open the next page.
Finally, set the starting time in timeline mode, and
then set whether other settings should be retained
from the currently open project or whether the factory
defaults should be used instead.
For further details about these settings, see “Editing
the project name” on page 38.
3 After you complete making settings touch the
CREATE PROJECT
button.
NOTE
If a project with the same project name already exists, the
CREATE PROJECT
button appears gray and you will not
be able to create a new project. If this happens, change
the project name.
4 Touch the
OK
button when the confirmation pop-
up message appears.
When creation of the project completes, the Home
Screen reopens.
Creating new sessions
Create new sessions as necessary. You do not need to
create a new session if you plan to record into an existing
one.
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
2 Touch the e button of the project in which you
want to create a new session to open its session se-
lection screen.
If it is not the current project, a pop-up window
appears confirming that you want to load it. Touch the
OK
button.
3 Touch the
MAKE SESSION
button to open the
MAKE
SESSION
screen.
8–Take mode
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info