617907

Tascam HS-2 Manual

63
Zoom out
Zoom in
Previous page
1/132
Next page
TASCAM HS-2 63
Bouncing
You can output part of a region or an interval that crosses
multiple regions as a single take.
Designating the bounce starting point
1 Touch the HOME key to open the Home Screen.
2 Use the m and , keys, for example, to locate
the timeline cursor at the bounce start point (time).
3 Touch the
Bounce I/O
button to open a pull-up
menu.
4 Touch the
SET IN
button on the pull-up menu to
set the bounce starting point (IN point).
The IN mark ( ) appears at the current position in the
mark display area.
Designating the bounce ending point
5 Use the m and , keys, for example, to locate
the timeline cursor at the bounce ending position
(time).
6 Touch the
Bounce I/O
button to open a pull-up
menu.
7 Touch the
SET OUT
button on the pull-up menu to
set the bounce ending point (OUT point).
The OUT mark (
) appears at the current position in
the mark display area.
The range between the IN mark (“
”) and OUT mark
(“
”) is to be edited, and indicated in light blue.
Bouncing the interval
8 Touch the
Bounce I/O
button to open a pull-up
menu.
9 Touch the
BOUNCE
button on the pull-up menu to
open the
BOUNCE NAME
screen where you can input
the bounce file name.
Input the file name. Follow the procedures in “Editing
the project name” on page 38.
10 Touch the
Enter
button on the
BOUNCE NAME
screen.
When a confirmation message pop-up appears, touch
the
OK
button or press the DATA dial.
While the file is being created, a progress status
pop-up appears.
When file creation completes, the pop-up disappears.
NOTE
You can cancel a bounce by pressing the
CANCEL
button
while the progress pop-up window is open.
Clearing the bounce starting and ending points
11 Touch the
Bounce I/O
button to open a pull-up
menu.
12 Touch the
CLEAR
button on the pull-up menu to
discard the currently set IN and OUT points.
When a confirmation message pop-up appears, touch
the
OK
button or press the DATA dial.
The IN (
) and OUT (
) marks in the mark display area
will disappear.
7–Timeline mode
… 63 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info