152393
21
Zoom out
Zoom in
Previous page
1/43
Next page
TASCAM DR-1 21
Display of input functions on the Record Screen
Adjusting the built-in microphone angle
Adjusting the input levels of microphones
8Recording
Icons appear on the Record Screen to show the
status of the
TYPE
,
POWER
,
LOW CUT
and
LEVEL
CTRL
settings.
ST
When
TYPE
is set to
STEREO
, the icon appears
as light letters on a dark background.
POWER
When
POWER
is
ON
, the icon appears as light
letters on a dark background.
LCF
When
LOW CUT
is set to
80Hz
or
120Hz
, the
icon appears as light letters on a dark background.
LEVEL CTRL
When
LEVEL CTRL
is set to
AUTO
or
LMT
, the
icon appears as light letters on a dark background.
You can adjust the angle of the built-in microphone to
best suit the placement of the unit and the location of
the sound source during recording.
You can adjust the angle in a 90° range as shown in
the illustration.
Microphone
angle
90°
You can adjust the level of each microphone input.
(The signal input level of the LINE IN jack is xed.)
The following procedures explain how to use the
Record Screen to set the levels.
1 Press the REC/PAUSE key to begin recording
standby. The key flashes red and the Record
Screen appears.
2 Use the INPUT volume control on the right side of
the unit to adjust the microphone input level.
The L/R meter shows the input level. If the input is
too high, the PEAK indicator to the right of the display
lights and a line remains at the right end of
the indicator bar.
Set the level as high as possible without causing the
PEAK indicator to light when the loudest sounds occur.
• When you have selected
INT/MIC1
as the input
source and are using the built-in microphone or MIC 1
IN
jack, if you nd the level to be too low even when
the INPUT volume is at maximum, use the INT/MIC1
Input Setting Screen to set the
GAIN
item to
HIGH
.
(See “Setting the INT/MIC1 input functions” on the
previous page.)
• When
LINE
is selected as the input source, adjust
the input level by changing the output level of the
sound source.
NOTE
Press the STOP/HOME key to end recording standby.
TIP
In addition to adjusting the • INPUT volume, try changing
the distance and angle between the microphone
and the sound source. The angle and distance of the
microphone can also changed the character of the
recorded sound.
An easy way to set the input level is to raise it until the •
PEAK indicator lights while inputting as loud a noise as
you expect to record. When the
PEAK indicator lights,
lower the input level until it no longer lights.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam dr 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam dr 1 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info