152393
19
Zoom out
Zoom in
Previous page
1/43
Next page
TASCAM DR-1 19
8Recording
Selecting the file type and sampling frequency
Setting the maximum file size
In addition to using the built-in microphone, you can
record using an external microphone or record the
output signal from a mixer or other audio source. You
can select among MP3 (44.1/48 kHz, 32–320 kbps)
and WAV (44.1/48 kHz, 16/24-bit) audio recording
formats. Moreover, with this unit, you can mix and
record a sound input through the built-in mic or one of
the input jacks with an audio le that is played back
using the overdubbing function.
Select the audio le type that you want to record
before you start recording.
1 Press the MENU key to open the Menu Screen.
2 Select the
REC SETTING
item to open the
Recording Settings Screen.
3 Use the
FORMAT
item to select the file type from
the following options: WAV at 16-bit (factory
setting) or 24-bit, or MP3 at 32 kbps, 64 kbps, 96
kbps, 128 kbps, 192 kbps, 256 kbps, or 320 kbps.
4 Use the
SAMPLE
item to select a sampling
frequency of 44.1 kHz (factory setting) or 48 kHz.
NOTE
For overdubbing, set the file type to WAV. You cannot •
use overdubbing when the setting is MP3. (See
“Overdubbing” on page 23.)
TIP
WAV files do not use data compression and are truer to •
the character of the sound, but they use much memory.
Since MP3 files use data compression, they do not use
nearly as much memory. For example, ordinary audio
CD tracks are 16-bit, 44.1 kHz WAV files. A 3.5–minute
CD track uses about 35 MB of space when copied to a
hard drive. The same track converted to a 128 kbps MP3
file uses only about 3.2 MB.
If you are making a recording that you intend to use in •
the production of a CD, it is a good idea to record WAV
files. If you have enough space, 24-bit recording gives
you extra head room, allowing you to capture a greater
dynamic range. When recording rehearsals, lectures
and songwriting ideas, for example, and higher quality
audio is not as important as smaller file size, MP3 may
be a better choice. There are many excellent books (and
resources on the Internet) about digital recording if you
want to learn more about these formats.
On the Recording Settings Screen, where you select
the audio le type as described above, you can also
set the maximum size of the audio le. Recording
automatically stops if the maximum le size is
reached while recording audio.
1 Press the MENU key to open the Menu Screen.
2 Select the
REC SETTING
item to open the
Recording Settings Screen.
3 With the
SIZE
item, select the maximum file size
from the following options: 64 M, 128 M, 256 M,
512 M, 1 G and 2 G (factory setting)
Under the file size value, the possible recording time
for the selected size, format and sample rate appears.
NOTE
For the same file size, the possible recording time differs
depending on the file type selected. Furthermore, if the
possible recording time is 24 hours or more, this will be
displayed as 23:59:59.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam dr 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam dr 1 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info