152393
23
Zoom out
Zoom in
Previous page
1/43
Next page
TASCAM DR-1 23
Overdubbing
Overdub recording
Preparation for overdubbing
8Recording
By overdubbing, you can play an instrument or sing as
you play back a saved track and mix and record both
sounds in a new le.
Follow these procedures to prepare for overdubbing.
Set the file type to WAV
Only WAV les can be created by overdubbing.
1 Press the MENU key to open the Menu Screen.
2 Use the wheel to select
REC SETTING
(highlighted in inverse) and press the
¥/π key.
3 Use the wheel to select
FORMAT
and press
the
¥/π key.
4 Use the wheel to select
WAV 16-bit
or
WAV
24-bit
.
5 Press
STOP/HOME to return to the Home Screen.
NOTE
The playback track can be either an MP3 or a
WAV le.
Turn
MONITOR
ON in the Input Setting Screen
1 Press the SETTING key to open the Input
Setting Screen.
2 Use the wheel to select the
MONITOR
item and
press the
¥/π key.
3 Use the wheel to select
ON
.
This status allows you to always monitor the input
signal. In other words, you can monitor a mix of
the track being played back and the input signal.
4 Press
STOP/HOME to return to the Home Screen.
TIP
By making the above settings, in addition to overdubbing,
you can use a recorded (or copied) audio track for vocal or
instrument practice, as well as karaoke.
Before beginning these procedures, in addition to
setting the le type to
WAV
and turning
MONITOR
ON, set the input and adjust the level if necessary.
1 When the Home Screen is displayed, use the
µ and keys to select the track for playback.
2 Press the
¥/π key to start playback, and check
the volume balance between the playback and the
input sounds.
3 Use the
MIX BALANCE keys as necessary to adjust
the balance by increasing or decreasing the
playback signal volume.
During adjustment using the keys, the playback
volume appears the lower part of the display.
4 Press REC/PAUSE to begin recording standby.
The screen overdubbing ON/OFF pop-up appears.
The recording file name, input source, recording
audio file type and sampling frequency also
appear so that you can confirm them before you
start recording.
5 Use the wheel to select
ON
from the overdubbing
ON/OFF pop-up.
6 Press the
REC/PAUSE key to start overdubbing.
When recording starts, the REC/PAUSE key lights
and the display shows the elapsed and remaining
recording times.
The lower part of the screen shows the name of
the playing file that is being mixed in the overdub.
7 To stop recording, press the
STOP key or directly
select a track for playback on the Browse Screen
(SeeBrowse Screen on page 27).
CAUTION
You cannot pause when overdubbing (the REC/PAUSE key
is inoperative).
NOTE
Set the file type to WAV for overdubbing (see “Selecting •
file type and sampling frequency” on page 19). If you try
to overdub when the file type is set to MP3 “
Format
is MP3
” appears and operation is prevented.
To play a track that is not in the currently selected •
playback area, you can select the track directly on the
Browse Screen (See “Browse Screen” on page 27), or
you can change the selected playback area on the Play
Mode Screen before conducting the above operation.
(See “Setting the playback area” on page 24.)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam dr 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam dr 1 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info