617896
38
Zoom out
Zoom in
Previous page
1/76
Next page
38 TASCAM DP-03SD
7 – Recorder Functions
Punching in and out
Punching in/out is a technique to replace a part of an already
recorded track.
Start playback and when you reach the part that you want
to replace, switch to record (punch in), then switch back to
playback (or stop) when you finish the part that you want to
replace (punch out).
1 Decide what part of the track you plan to replace and choose
a point to begin where the new recording can sit well with
the existing recording.
2 Press the REC button of the track that you plan to replace
part of to start record standby (REC indicator blinks).
3 Start playback before the part of the track that you want to
replace.
4 Press the RECORD () button to start recording (punch
in) when you reach the part. Play or sing what you want to
record.
5 Press the PL AY (Á) button to switch to playback (punch
out) when you finish the replacement recording.
NOTE
When the recording source is set to a built-in microphone
(INTERNAL MIC A/B), the sound of pressing a button to
punch in and out could be recorded. This can be avoided
by using a foot switch to punch in and out or the automatic
punching in and out functions. (See “Automatically punching
in and out” on page 43.)
TIP
You can also press the STOP (ª) key to punch out at the end
of the replacement recording.
Using the foot switch to punch in/out
Using a foot switch connected to the REMOTE jack on the rear
panel, you can punch in and out.
In step 4 above, step on the foot switch instead of pressing the
RECORD () button. In step 5, step on the foot switch again
instead of pressing the PLAY (Á) button.
Foot switch
TASCAM RC-3F (optional)
NOTE
Press the switch (pedal) that you have set to
PUNCH
in the
foot switch settings. By default, the center pedal (Foot SW
C) is set to
PUNCH
. (See “Setting the foot switch” on page
38.)
Setting the foot switch
Set the foot switch on the
PREFERENCE
screen.
1 When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2 Use the DATA wheel to select
PREFERENCE
, and press
the F4 (¥) button to open the
PREFERENCE
screen.
3 Use the F3 (§) and F4 () buttons to select
FootSW L
.
4 Use the DATA wheel to select the function to assign to the
left foot switch pedal.
5 In the same way, use the
Foot SW C
item to set the
function of the center pedal and the
Foot SW R
item to
set the function of the right pedal.
6 After making the settings, press the HOME button to return
to the Home Screen.
Setting Function
PLAY
Same as the unit’s PL AY (Á) button
REC
Same as the unit’s RECORD () button
STOP
Same as the unit’s STOP (ª) button
F FWD
Same as the unit’s F FWD () (TO LAST REC)
button
REW Same as the unit’s REW (Ô) (TO ZERO) button
PUNCH
Press during playback to PUNCH IN and during
recording to PUNCH OUT
PLY/STP
Press when stopped to start playback, and press
at any other time to stop
CUE Locate to the last point where playback started
Default values:
CUE
(L),
PUNCH
(C),
PLY/STP
(R)
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info