617896
37
Zoom out
Zoom in
Previous page
1/76
Next page
TASCAM DP-03SD 37
6 – Basic Recording
3 Press the F2 (
EXEC
) button to execute the multi-undo and
restore the song state to just after the selected event was
conducted. In this state, the UNDO/REDO indicator lights.
The event information undone through the above operation
is not erased. The unit has simply been returned to a
previous state. On the
HISTORY
screen, a
*
appears next
to the most recent event after undoing.
NOTE
When the
HISTORY
screen is open, the UNDO/REDO
[HISTORY] button does not function, so single undo and
redo cannot be used.
CAUTION
When saving a song, a maximum of 500 operation history
items can be saved with the song data. If the operation
history exceeds 500 items, the oldest events in the history
are erased when the song is saved. These erased events
cannot be restored.
When the power is turned OFF (STANDBY) the operation
history is completely erased. The operation history is not
restored when the power is turned ON again.
Erasing the operation history
When the power is turned OFF (STANDBY), the operation history
of the currently loaded song is erased (cleared).
When the power is turned ON again, the song last in use is
reloaded in the same state it was in when the power was turned
OFF (STANDBY). The operation history is not restored, however,
so past operations cannot be undone or redone.
NOTE
The operation histories of songs that are not loaded are not
erased when the power is turned OFF (STANDBY).
Using the following procedures, you can also erase (clear)
the operation history of the currently loaded song without
turning the power OFF.
1 Press and hold the UNDO/REDO [HISTORY] button to open
the
HISTORY
screen.
2 Press the F4 (
CLEAR
) button.
A confirmation message appears.
3 Press the F3 (
YES
) button.
Another confirmation message appears again.
4 Press the F3 (
YES
) button to clear the operation history and
erase the unused data.
The Home Screen reopens when this operation completes.
NOTE
To cancel erasing the operation history, press the F4 (
NO
)
button.
TIP
If you open the
HISTORY
screen immediately after
erasing the operation history, the event (operation) that
appears is “
0
” (
-START UP-
), confirming that all
operation history has been cleared.
If you want to keep the operation history even when you
power OFF (STANDBY), turn song protect ON before turning
the power OFF (STANDBY) (see “Protecting songs” on page
32).
CAUTION
You cannot undo erasing the operation history! Only erase it
when you are certain that you want to do so.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info