617896
40
Zoom out
Zoom in
Previous page
1/76
Next page
40 TASCAM DP-03SD
7 – Recorder Functions
2 Turn the DATA wheel to change the value above the cursor.
When adjusting, the value will carry over automatically when
it reaches the highest or lowest value in a field. For example,
when turning the DATA wheel to increase the value in the
seconds field, the number will change from
59
to
0
and the
minutes value will increase by one. The time display blinks
when using the DATA wheel. The blinking stops when the
recorder moves to the displayed position.
3 Press the HOME button to move to a different time division
and turn the DATA wheel to change the value.
4 After setting the desired time value, press the PLAY (Á)
button to start playback from that position.
Location marks
The unit can store up to 999 location marks per song! Use these
to mark the start of verses, vocal entry points, etc.
To set a location mark
While stopped, recording or playing, press and hold the LOCATE
LIST [LOCATE SET] button at the point where you want the new
mark.
The mark number is shown next to the icon on the Home
Screen. The mark number you see is the one at or immediately
before the current position. In the example below,
001
indicates thefirst mark in the selected song.
NOTE
Marks are numbered in the order you enter them, not
according to their position in the song. Mark 005 can
therefore appear in a song before mark 001.
To move to a location mark
Press the LOCATE LIST [LOCATE SET] to show the location mark
list:
Use the DATA wheel to choose a mark (they’re listed in the order
they appear in the song) and press F4 (
JUMP
) to jump to that
mark.
NOTE
Press the F1 (
EXIT
), LOCATE LIST [LOCATE SET] or HOME
button to return to the Home Screen.
If the current song does not have any location marks, the
location mark list will not open. A
No Locate Mark
pop-up appears briefly and then the
I/O SETTING
screen opens.
To delete a location mark
You can erase a location mark when the recorder is stopped.
1 Press the LOCATE LIST [LOCATE SET] button to show the
location mark list.
2 Use the DATA wheel to select a mark and press the F2
(
EDIT
) to bring up the edit screen.
3 Press the F2 (
DEL
) button to erase that mark and return to
the
LOCATE LIST
screen.
4 Press the F1 (
EXIT
), LOCATE LIST [LOCATE SET] or HOME
button to return to the Home Screen.
NOTE
The marks are shown in the order they appear in the song,
not by number.
This operation cannot be undone. Be certain before
executing it.
To edit a location mark
If you made a mistake when you entered a location mark, you
can change the time of the mark.
TIP
This is sometimes called “trimming”.
1 Press the LOCATE LIST [LOCATE SET] button to show the
location mark list.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info