617899

Tascam DP-02CF Manual

49
Zoom out
Zoom in
Previous page
1/80
Next page
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF 49
2 – Advanced techniques
This function takes the section of a track or tracks marked
by the IN and OUT points, and moves it to the chosen track
or tracks, starting at the TO point.
After the operation, the selected section of the source
between the IN and OUT points is replaced by silence.
This operation overwrites anything which is already
recorded at the destination. The track is therefore the same
length as it was before the operation.
OUTIN TO
OUTIN TO
You can change the following values:
SOURCE.TRK This sets the source track or tracks from
which the section is taken. Choose 1 through 8 to select an
individual track. Choose 1/2, 3/4, 5/6 or 7/8 to select a pair
of tracks. Choose 1-8 to select all tracks.
DESTINATION. TRK This sets the destination track or
tracks to which the selected section is moved. What you
can select here depends on what you have selected for the
source track. If you have selected a single track, you can
select tracks 1 through 8 here. If you have selected a pair
of tracks (for instance, 1/2), you can only select track pairs
here. If you have selected all tracks (1-8), then 1-8 is the
only option available to you here.
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
MOVE ® PASTE
COPY ® INSERT
This function takes the section of a track or tracks marked
by the IN and OUT points, copies it, and inserts it on the
chosen track or tracks, as new material, starting at the TO
point.
The original source is left unchanged.
The insert operation adds the selected section as new mate-
rial to the destination. Nothing is overwritten at the desti-
nation, as any existing material following the TO point is
moved to the end of the newly-inserted section. The track
is now longer than it was before the operation.
You can copy the section more than once in one operation
(for example, to repeat a verse/chorus section).
OUTIN TO
OUTIN TO
You can change the following values:
SOURCE.TRK This sets the source track or tracks from
which the section is copied. Choose 1 through 8 to select
an individual track. Choose 1/2, 3/4, 5/6 or 7/8 etc. to select
a pair of tracks. Choose 1-8 to select all tracks.
DESTINATION. TRK This sets the destination track or
tracks into which the selected section is inserted. What you
can select here depends on what you have selected for the
source track. If you have selected a single track, you can
select tracks 1 through 8 here. If you have selected a pair
of tracks (for instance, 1/2), you can only select track pairs
here. If you have selected all tracks (1-8), then 1-8 is the
only option available to you here.
COPY TIMES This is the number of times that the select-
ed section is inserted (end-to-end) in the destination track
or tracks. You can set this value from 1 to 99.
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-02CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02CF in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02CF

Tascam DP-02CF Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info