617899

Tascam DP-02CF Manual

48
Zoom out
Zoom in
Previous page
1/80
Next page
IMPORTANT SAFETY PRECAUTIONS
48 TASCAM DP-02/DP-02CF
2 – Advanced techniques
Track editing functions
The track editing functions available on the unit are:
COPY->PASTE
COPY->INSERT
MOVE->PASTE
MOVE->INSERT
•
•
•
•
OPEN
CUT
SILENCE
CLONE TRACK
CLEAN OUT
•
•
•
•
•
Track editing function
This function takes the section of a track or tracks marked
by the IN and OUT points, copies it, and pastes it at the TO
point on the chosen track or tracks.
The original source is left unchanged.
The copy operation overwrites anything which is already
recorded at the destination. The track is the same length as
it was before the operation.
You can copy the section more than once in one operation.
OUTIN TO
OUTIN TO
You can change the following values:
SOURCE.TRK This sets the source track or tracks from
which the section is copied. Choose 1 through 8 to select
an individual track. Choose 1/2, 3/4, 5/6 or 7/8 to select a
pair of tracks. Choose 1-8 to select all tracks.
DESTINATION. TRK This sets the destination track or
tracks to which the selected section is pasted. What you
can select here depends on what you have selected for the
source track. If you have selected a single track, you can
select tracks 1 through 8 here. If you have selected a pair
of tracks (for instance, 1/2), you can only select track pairs
here. If you have selected all tracks (1-8), then 1-8 is the
only option available to you here.
COPY TIMES This is the number of times that the select-
ed section is pasted into the destination track or tracks.
You can set this value from 1 to 99.
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
COPY ® PASTE
IN, OUT and TO
We have previously seen how the IN and OUT points can
be used for punching and for location. They are also used
in these track editing operations, together with the TO
point.
The IN point marks the start of the part of the track
which is selected when editing a part of a track (rather
than a whole track).
•
The OUT point marks the end of the part of the track
which is selected when editing part of a track.
The TO point marks the final destination of a copy or a
move operation.
•
•
1. Make sure that the unit is stopped (not playing back
or recording).
2. Press the TRACK EDIT key on the top panel. The
displayshows:
3. Use the DATA dial to move the cursor to the track
editing function you will be using and press the
YES/ENTER or ¥ cursor keys.
4. Select the appropriate values, as described for each
individual function.
5. Press YES/ENTER to perform the operation, or NO/
EXIT to exit without performing the operation.
Using edit mode
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-02CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02CF in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02CF

Tascam DP-02CF Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info