617899
46
Zoom out
Zoom in
Previous page
1/80
Next page
IMPORTANT SAFETY PRECAUTIONS
46 TASCAM DP-02/DP-02CF
2 – Advanced techniques
6. Use the DATA dial to select the WAV file to be
imported and press YES/ENTER.
The display shows the amount of free space on the
current partition, and the size of the selected WAV
file.
NOTE
Make sure the target track is an empty track. You
cannot import a track unless the target track is empty.
7. Use the DATA dial to select the track into which the
WAV file will be imported. Press YES/ENTER.
Appropriate messages are shown if there is not
enough space, the file is in the wrong format, etc.
The unit reads the file from the FAT partition into the
track, with the start of the file at the “zero” position in the
song.
Once the file has been read into the track, it can be edited
(moved, copied, etc.) like any other recorded track. See
About track editing” on page 47.
Exporting tracks
Any track can be exported as a mono, 16-bit 44.1kHz WAV
format file.
1. From the MENU screen, select and enter the WAVE
menu.
2. Select the EXPORT TRACK action and press the
YES/ENTER key.
The display shows a list of suggested file names,
based on the song tracks which contain audio:
NOTE
If a track does not contain audio, it does not appear in
this list.
3. Use the DATA dial or cursor (§,) keys to highlight
a track, and rotate the DATA dial clockwise to mark
it for export. A “ ” appears on the check box.
Repeat this action to select multiple tracks to export.
To deselect a track, use the cursor (§,) keys to
highlight and rotate the dial countercolckwise. The
check mark disappears.
When the cursor is by a track, you can press SHIFT and
MENU to bring up a titling screen:
Edit the name, and press YES/ENTER when youre
finished (“Titling” on page 11).
4. When all tracks for export have been selected, press
YES/ENTER.
The display shows the free space on the FAT parti-
tion (the destination of the exported tracks) and the
space which the exported tracks will occupy.
5. Press YES/ENTER to export the selected tracks.
The tracks are exported with the names you entered
(a .WAV extension is added). If you already have
exported a track file with the same name as one you
have chosen, a message appears asking you if you
want to overwrite the older file.
6. Connect the unit to the computer and “open” the
recording media (““Open” and “Close”” on page 43).
7. Use the PC operating system to copy or move the
exported tracks from the WAVE directory of the unit
FAT partition to the PC.
Once the tracks are on the PC, you can “close” the unit.
The exported tracks on the PC can then be backed up to
CD-R, etc.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-02CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02CF in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02CF

Tascam DP-02CF Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info