617899

Tascam DP-02CF Manual

51
Zoom out
Zoom in
Previous page
1/80
Next page
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF 51
2 – Advanced techniques
This copies a track or pair of tracks to another track or pair
of tracks.
There are no IN and OUT points when cloning.
There are two values that you can change:
SOURCE.TRK Select an individual track (1 through 8),
a pair of tracks (1/2, 3/4, 5/6, 7/8) or the MASTER stereo
track.
DESTINATION. TRK This sets the destination track or
tracks to which the source track is cloned. What you can
select here depends on what you have selected for the source
track. If you have selected a single track, you can select
tracks 1 through 8 here. If you have selected a pair of tracks
(for instance, 1/2), you can only select track pairs here.
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
NOTE
If you try to select the same track as a destination that
you have selected as the source, when you press the
YES key, a message will appear.
T I P
Although you cannot mix the inputs of the STEREO MIX
to the mixed master track, you can add a drum machine
(say for instance) to the mix in the following way:
Mix down to the mix master track, using the EFFECT
SEND and EFFECT RETURN (“Mixdown and master-
ing” on page 27) to add reverb to your mix.
Clone the stereo mix to a pair of tracks.
•
•
CLONE TRACK
This function deletes the material between the IN and OUT
points on the chosen track or tracks and “closes up” the
gap.
The source and destination are the same, and after the
operation, the material between the IN and OUT points is
deleted. The track is therefore shorter than the original.
OUTIN
IN
There is only one value that you can change:
CUT.TRK Select an individual track (1 through 8), a pair
of tracks (1/2, 3/4, 5/6, 7/8), all of the tracks (1-8) or all
tracks (ALL).
Press YES/ENTER to perform the operation or NO/EXIT to
leave this screen.
CUT
This function is equivalent to recording silence between
the
IN
and
OUT
points on the chosen track or tracks.
Material is deleted, but the length of the result is the same
as that of the original (the gap is not closed up, unlike with
the CUT function).
OUT
OUT
IN
IN
There is only one value that you can change:
SILENCE.TRK
Select an individual track (1 through 8), a
pair of tracks (1/2, 3/4, 5/6, 7/8), or all the tracks (1-8).
Press
YES/ENTER
to perform the operation or
NO/EXIT
to
leave this screen.
SILENCE
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-02CF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-02CF in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DP-02CF

Tascam DP-02CF Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info