587270

Tascam DM-3200 Manual

17
Zoom out
Zoom in
Previous page
1/120
Next page
2 – Basic operational concepts :
TASCAM DM-3200 Owner’s Manual 17
On the top row of the top section, the left side shows
(on top) the current encoder mode (see “Encoders”
on page 20) and immediately below that, the cur-
rently-selected module or modules. To the right of
this, the current automation settings (on or off, or
global mode) are shown.
To the right of this, the name and number of the cur-
rent library entry selected with the direct library
functions are shown, and immediately below that, in
larger letters, the title of the current screen.
Finally, on the right, the current timecode value (with
the source as set up as preference) is displayed.
Note the timecode displayed can be changed as a
setup option. See “UPPER BAR DISPLAY” on
page 33.
Jumping to commonly-used screens
Within a project, it’s likely that you’ll find yourself
using some screens more than others. One of the
main such screens is the module screen, allowing you
to view and change a module’s parameters at a
glance.
For this reason, a dedicated MODULE
key, with indicator, is provided to the
right of the number keys. The module
parameters shown are those of the
module selected using the
SEL keys.
The three
USER keys are used to set
up three commonly-used shortcuts to
screens used frequently within a
project.
Setting a USER screen With the
screen shown to which you want to
make a shortcut, press and hold the
SHIFT and CTRL keys (to the left of
the unit). While holding down these
keys, press one of the
USER keys.
Release all the keys. Next time you
press that
USER key (without the SHIFT and CTRL
keys), the display shows the screen you set
previously.
Figure 2.2: Explanation of the top line of screen displays
C
urrent
lib
rary entry
Current timecode value
Encoder mode
Currently-selected
module
Screen display
selected by direct recall
Automation status
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DM-3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DM-3200 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info