587270

Tascam DM-3200 Manual

18
Zoom out
Zoom in
Previous page
1/120
Next page
2 – Basic operational concepts : Special controls
18 TASCAM DM-3200 Owner’s Manual
Fader layers
The DM-3200 has sixteen
channel faders and encoders,
but is capable of controlling
48 channels, in addition to
the master aux send and buss
levels.
The faders (and the encod-
ers, when the encoders are
associated with channels)
are therefore arranged in
layers, allowing different
groups of faders to be
accessed.
Use the
LAYER STATUS
keys (which light when the
appropriate layer is active)
to select these layers. These
keys are located to the right
of the master fader. When
these keys are pressed, the faders move to the appro-
priate positions, reflecting the new fader layer.
The first three keys are used to select the channels (1
through 16, 17 through 32 and 33 through 48).
Following this, the next key selects the 16 busses.
The next key selects the aux sends, and uses the first
eight faders for this purpose (faders 9 through 16 are
disabled here).
The faders may be used for remote DAW control, etc.
in
REMOTE mode.
Special controls
The DM-3200 incorporates a few controls that are
not found on every digital mixer and which therefore
may be a little unfamiliar.
These are the PODs, which are located immediately
below the display, and the 16 encoders, located above
the channel strips.
The PODs
The DM-3200 has four encoder/key combinations
(referred to as PODs) below the display. The func-
tion of these pods varies according to the current
screen display.
Very often, in a screen with many controls displayed,
the up and down cursor keys are used to move a high-
lighting box around the screen. These boxes high-
light a maximum of four on-screen rotary controls,
which are then controlled by the corresponding POD
encoders (immediately below the on-screen con-
trols).
Note also the contrast control to the right of the
PODs.
Figure 2.3: POD controls
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DM-3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DM-3200 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info