Manual Tascam DM-3200 (page 16 of 120) (English)

587270

Zoom out

Zoom in

1/120

16 TASCAM DM-3200 Owner’s Manual

2 – Basic operational concepts

NOTE

Please take the time to read and understand this sec-

tion, so that you understand how the basic navigation

and parameter editing operations are performed.

Dedicated screen mode selection keys provide access

to the different screens shown on the LCD display:

Press one of these keys to access the screen marked

above the key in “normal” (for example, key

4 is

used to select the

AUX 7-8 screen).

For the alternative screen available from many keys,

press the

ALT key so that the ALT indicator lights

(see “Smart keys” on page 16 for details of the

behavior of this key), and then the appropriate key to

select the screen whose title is written in inverted

characters above the key. For example, key

7 nor-

mally brings up the

AUX 1-2 screen, but using this key

with the

ALT key brings up the OPTION screens. Note

that some keys (e.g. the

LIBRARY and ROUTING

keys) are marked as “alternative” screens only, but

these keys do not need the

ALT key to be pressed to

access their screens.

Many screens accessed with these keys include sub-

screens or “pages”. These sub-screens can be

accessed using the POD keys (“The PODs” on

page 18) or repeated presses of the same control key

will cycle through these pages.

Use the cursor keys to navigate around the screen

(sometimes, the dial can also be used to navigate).

Radio buttons (exclusive-or options) or checkboxes

(options) are set and unset using the

ENTER key

when the cursor highlights the option.

When a parameter is selected, the dial is usually used

to change the value.

For non-numerical values changed using the dial,

usually

ENTER should be pressed to confirm the

entry. Note that while the parameter is being edited,

the displayed parameter blinks on screen, and the

cursor cannot be moved until the new value is con-

firmed with the

ENTER key.

For a few parameters (chiefly connected with the

remote unit location facilities), the number keys can

also be used when the number is selected using

ENTER. Confirm the entry of a value made in this

way by pressing

ENTER.

Smart keys

The DM-3200 features five “smart keys”: the ALT

key and four “talkback” keys (

DIM, MONO, TO

SLATE

and TO STUDIO). When the status of any of

these keys is off, and the key is then pressed very

briefly and released, the status of the key, as shown

by the indicator, is changed to on after the key is

released (latching).

If the status of the key is off, and the key is pressed

and held down, the status is only changed as long as

the key is held down (non-latching).

If the status of one of these keys is on, the length of

the key press makes no difference—the key status

changes to off when the key is released.

What’s on the screen?

For almost all the screens displayed by the DM-3200,

there are two common areas. The first is at the top,

and we explain that area here (the second is the row

of labels which identify the POD functions

(described in “Special controls” on page 18)).

These top and bottom areas are for display, and their

contents are automatically determined (they cannot

be edited).

Figure 2.1: Control keys

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DM-3200 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam DM-3200 Manual

Product: