161727
24
Zoom out
Zoom in
Previous page
1/32
Next page
1-Introduction
24 TASCAM CD-RW900
When audio signal is not detected more than ve sec-
onds, the CD-RW900 automatically will stop recording
and enters record standby mode.
NOTE
In the Sync 1 mode, if the unit detects the signal which
is under the adjusted level over ve secondsd, the Sync
recording mode will be canceled.
3 To cancel the Sync recording mode, press the
SYNC REC key and select the Sync OFF. Record-
ing returns to normal and continues till you press the
STOP key or the source signal stops.
Pressing the STOP key stops recording. Once
stopped, the selected mode will be canceled.
NOTE
When the Sync 1 is on, and the READY key is
pressed, Sync recording stops and the setting will
be canceled.
When the Sync ALL is on, and the READY key is
pressed, the unit enters recording standby mode
with remaining the Sync recording setting.
If you set the value only high-level signals trigger re-
cording, remember that this will not record the start
of a piece:
Also remember that when recording from an analog
source, the threshold should be set so that it is high-
er than the “noise oor”. If the “noise oor” is higher
than the threshold, a false start will occur:
5−Recording
Automatic track division
The trigger level can also be used to divide tracks if the
A_TRACK (auto track) function is enabled.
When this function is enabled, the unit automatically in-
serts a track division in the recorded material.
To enable or disable automatic track division:
1 Use A_TRK option in the REC sub-menu to set the
mode on. The
A.TRACK
indicator at the top right of
the display lights.
2 Rotate and push the MULTI JOG dial to select and
enter the modes following:
Level
When the sound level has dropped below the
threshold for more than two seconds, and sound
has re-started, the track will be divided.
Use A_TRK LEVEL option in the REC sub-menu.
The trigger level is set to -24dB to -72 dB.
DD (digital direct)
When recording digitally from MD, CD or DAT, this
mode detects a track boundary and divides the
track.
However, when the DD mode is on, and if the analog
source or non-DAT/CD/MD digital connections are
detected, the track number will be increased by the
setting level that you set in the Level mode.
A_LVL
At least
2 seconds
level
time
Track increment
S_LVL
REC ready
level
time
Five seconds
Recordsing starts
level
time
T h i s p a r t o f
the track is not
recorded
Start of track is not registered
level
time
Noise is higher
than threshold
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam cdrw900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam cdrw900 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info