587263
34
Zoom out
Zoom in
Previous page
1/44
Next page
34 TASCAM CD-RW901MKII
6 − After recording
Refreshing a disc
Refreshing the disc makes a disc usable again. This operation
destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press the
ERASE/DEL key on the front panel or the ERASE
key on the remote control. Select the REFRESH?
rotating the MULTI JOG dial or pressing the MENU
(+/-) keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2. Push the MULTI JOG dial or press the ENTER key
on the remote control to enter the function. The
display shows Sure?
To cancel the operation at this point, press the
STOP key.
3. Push the MULTI JOG dial or press the ENTER key
again to proceed the operation.
The display shows Erase flashing and the remaining
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been refreshed, Complete appears
then Blank Disc will appear on the display.
Erasing a whole disc
When you want to erase a whole disc (all the tracks on a disc),
follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the operation.
1. While stopped, press the ERASE/DEL key on the
front panel or the ERASE key on the remote control.
Select the ERASE DISC? by rotating the MULTI
JOG dial or pressing the MENU (+/-) keys on the
remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2. Push the MULTI JOG dial or press the ENTER key
to enter the function. The display shows Sure?
To cancel the operation at this point, press the
STOP key.
3. Push the MULTI JOG dial or press the ENTER key
again to proceed the operation.
The display shows Erase flashing and the remaining
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been erased, Complete appears
then Blank Disc will appear on the display.
Erasing tracks
Erasing
This operation erases the specified track and all sub-sequent
tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key cannot
be used to cancel it. Please check the track range to be
deleted first.
Erasing a track is only possible when the unit is in
continuous playback mode.
1. While stopped, press the ERASE/DEL key on
the front panel or the ERASE key on the remote
control. Select the ERASE TRACK? rotating
the MULTI JOG dial or pressing the MENU (+/-)
keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2. Push the MULTI JOG dial or press the ENTER key
to enter the function.
The display shows Erase XX-XX (the number of
the first track and last track to be erased).
Rotate the MULTI JOG dial or press the MENU (+/-)
key to change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
3. Push the MULTI JOG dial or press the ENTER key to
operate the function.
The display shows Sure?
To cancel the operation at this point, press the
STOP key.
4. Push the MULTI JOG dial or press the ENTER key
again to proceed the operation.
The display shows Erase flashing and the remaining
time. The unit starts counting down from a time
shown on the display.
5. When the tracks have been erased, Complete will
appears on the display.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-RW901MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-RW901MKII in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info