587263

Tascam CD-RW901MKII Manual

35
Zoom out
Zoom in
Previous page
1/44
Next page
TASCAM CD-RW901MKII 35
IMPORTANT SAFETY INSTRUCTIONS
Titles can be given to the disc and the tracks on the disc, using
the TEXT EDIT option on the TEXT sub-menu.
NOTE
After a new title is selected and entered on the disc,
TOC will light up on the display. If the power is turned
off, the TOC has not been recorded on the disc and
the titles will not have be added. You must finalize
the disc to save the titles.
Follow the guidelines below to input titles on the screen.
Operate them when in the text edit mode.
It is more efficient to connect a keyboard for title input ( see
“Title input by keyboard” on page 36).
Select the type of character for input
Press the DISPLAY key on the unit or the remote control
to select from two different types of characters.
Lower case letters/code: no indication
Capital letters/code: CAPS
Input procedure
Rotate the MULTI JOG dial or the MENU (+/-) keys on
the remote control to get the desired characters on the
display.
Push the MULTI JOG dial or press the ENTER key on
the remote control to enter.
To move the cursor position
Use the ∆ /˙ key and the ˚/¥ key on the front
panel, or the SEARCH key on the remote control.
To delete characters
Place the cursor on the character, then press the
ERASE/DEL key on the front panel, or the ERASE key
on the remote control.
To insert characters
Move the cursor to the location where you wish to insert
a character, and press the FINALIZE/INS key on the
front panel or the FINALIZE key on the remote control.
To change a character
Place the cursor on the character to be changed, then
input the desired character.
NOTE
As with the TEXT menu, if you attempt to eject the
disc without writing the TOC to the disc, the display
will show Sure? Text!. If you want to eject the disc
without performing a TOC write, press the OPEN/
CLOSE key while “Sure Text!” is shown on the display.
The text that have been edited or entered will be
abandoned.
The disc or track title on a finalized disc cannot be
edited. Unfinalizing (CD-RW only) is needed in this
case to use the title input function.
Title input operation
1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see “Operation basic” on page 16).
2. Rotate the MULTI JOG dial or repeatedly press the
MENU (+/-) keys on the remote control to select the
track number you wish to title.
3. Push the MULTI JOG dial or press the ENTER key
on the remote control.
Now, you can input or edit the track title following
the guidelines above.
4. Press the MENU key to enter.
If you want to cancel, press the STOP key.
Track title input
Disc title input
1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see “Operation basic” on page
16). Text> Disc will appear.
2. Press the MULTI JOG dial or the MENU (+/-) key on
the remote control.
Now, you can input or edit the disc title following
the guidelines above.
3. Press the MENU key to enter.
If you want to cancel, press the STOP key.
7 − Titling
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-RW901MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-RW901MKII in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info