587253
20
Zoom out
Zoom in
Previous page
1/32
Next page
20 TASCAM CD-200BT
4 – CD playback
Search forward and backward
You can search forward and backward in a track while
listening to it.
1. Play or pause the desired track.
2. Press and hold a SEARCH m/, [.//] button on
the main unit or a search (m/. or //,) button on
the remote control to start searching forward or backward.
3. Release the button that you are holding to stop searching
and return the unit to the state it was in before searching
(playback or pause).
NOTE
Searching forward and backward is possible with sources
other than audio CDs.
Folder playback (data CDs)
With data CDs, you can set the selected folder (current folder)
as the playback area. Follow the procedures below to set the
playback folder. You can also set the playback area to be all the
tracks/files on the CD by selecting
ALL PLAY
.
Setting the playback folder
1. Press and hold the PLAY MODE/PLAY AREA [SOURCE SEL]
button on the main unit or press the remote PLAY AREA
button to set the playback area to
FOLDER
.
2. Use the main unit FOLDER g/t [PITCH −/+] buttons or
the remote FOLDER g/t buttons to skip to the previous or
next folder.
This will skip to the beginning of the first track in the
previous or next folder. If you hold down one of these
buttons, you can skip through folders continuously in order.
NOTE
When you skip to a different folder, it becomes the current
folder.
During folder playback, repeat playback will play back all
tracks inside the current folder repeatedly.
During folder playback, random playback will play back all
tracks inside the current folder randomly.
Programmed playback
To use programmed playback, you must set a program either
before or after setting the playback mode to programmed
playback mode. (See “Selecting the playback mode on page
18.)
When in programmed playback mode, press the PLAY/PAUSE
button on the main unit or the remote control to start playback
of the set program in order from the first track (program step
01).
Press the main unit SEARCH m/, [.//] button or
the remote search (m/. or //,) button to skip to the
previous or next program step.
When playback is stopped in program playback mode using an
audio CD, the total number of tracks in the program and the
total program time are shown.
When using a data CD, only the program number is shown.
NOTE
To select programmed playback, when stopped, press the
main unit PLAY MODE/PLAY AREA [SOURCE SEL] button
or the remote PLAY MODE button.
With data CDs, you cannot set a program when the
playback area is
ALL PLAY
. Change the playback area to
FOLDER
to enable tracks in the current folder to be used in
the program.
Setting the program
When no program is set, follow the procedures below to set a
program using the remote control.
NOTE
The program cannot be set from the main unit.
You can set a program at any time regardless of the current
playback mode.
CD programs are cleared when the disc tray is opened or the
current folder is changed.
1. Press the remote PROGRAM EDIT button when playback is
stopped.
The unit enters program setting mode. If no program has
been set, it will be possible to choose a track for program
step 01 (
PROG
indicator blinks).
Audio CD example
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200BT in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info