587253
18
Zoom out
Zoom in
Previous page
1/32
Next page
18 TASCAM CD-200BT
4 – CD playback
Playback area
With data CDs, you can set the area to be used for playback (PLAY
AREA setting). Follow the procedures below to set the playback
area.
Setting the playback area
Press and hold the PLAY MODE/PLAY AREA [SOURCE SEL]
button on the main unit or press the remote control PLAY AREA
button to set the playback area.
The selected playback area is shown as follows in the main
display area for about two seconds and then disappears.
Depending on the selected playback area, the
FOLDER
indicator might also appear on the display.
Main
display area
FOLDER
indicator Meaning
ALL PLAY
Not shown All files on the data CD will be played
back.
FOLDER
Shown All files in the selected folder on the
data CD will be played back.
Playback modes
This unit can play back tracks using the following four playback
modes.
Continuous playback mode (default setting)
Tracks on the CD are played back in numerical order.
NOTE
When
FOLDER
is the playback area for a data CD, the
tracks in the current folder will be played back in numerical
order.
Single playback mode
The selected track on the CD is played back once and then
playback stops.
Random playback mode
The tracks on the CD are played back in random order regardless
of their track numbers. Playback stops after all tracks have been
played.
NOTE
When
FOLDER
is the playback area for a data CD, the
tracks in the current folder will be played back in random
order. (See “Folder playback (data CDs)” on page 20.)
Program playback mode
The programmed tracks are played back in program order. See
“Programmed playback” on page 20 for details.
Selecting the playback mode
Press the main unit PLAY MODE/PLAY AREA [SOURCE SEL]
button or the remote PLAY MODE button to cycle through the
playback modes. During playback, however, you can only switch
among continuous, single and random playback modes.
To select programmed playback, press the main unit PLAY
MODE/PLAY AREA [SOURCE SEL] button or the remote PLAY
MODE button when playback is stopped.
The currently selected playback mode is shown on the display as
follows.
Indicator Playback mode
No indicator Continuous playback mode
SNGL
Single playback mode
RAND
Random playback mode
PROG
Program playback mode
The selected playback mode is retained even when the
power is turned off.
NOTE
Immediately after pressing the PLAY MODE/PLAY AREA
[SOURCE SEL] button on the main unit or the PLAY MODE
button on the remote control, the selected mode is shown
on the main display area as follows.
Continuous playback mode set:
CONTINUE
Single playback mode set:
SINGLE
Random playback mode set:
RANDOM
Programmed playback mode set:
PROGRAM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200BT in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info