587253
22
Zoom out
Zoom in
Previous page
1/32
Next page
22 TASCAM CD-200BT
4 – CD playback
Adding more program tracks
You can add tracks to the end of an already set program.
1. Press the PROGRAM EDIT button on the remote control
while playback is stopped to activate program setting mode.
2. Press and hold the PROGRAM EDIT button until the empty
program step where it is possible to add a track appears. (No
track number is shown and
PROG
blinks.)
3. Use the remote number (0–9) buttons or skip (m/.
and //,) buttons to select the track to add and press
the PROGRAM EDIT button.
4. In this state, you can repeat step 3 to add more tracks, or
you can press the PROGRAM EDIT button to exit program
setting mode.
CAUTION
Although tracks can be added to the end of a program and
tracks can be replaced with different tracks, tracks cannot
be inserted into the middle of a program.
If you want to insert a track into the middle of the program,
replace and add program tracks to alter the program
contents.
Clearing the program
You can clear the entire program that has been set.
1. Press the PROGRAM EDIT button on the remote control
while playback is stopped to activate program setting mode.
2. Press and hold the PROGRAM EDIT button until the empty
program step where it is possible to add a track appears. (No
track number is shown and
PROG
blinks.)
3. Press the remote STOP button.
-CLEAR-
appears on the display. After clearing completes,
program setting mode resumes with the empty program.
In addition to the above procedure, opening the disc tray or
removing the disc also clears the program.
NOTE
CD programs are cleared when the disc tray is opened or the
current folder is changed.
Repeat playback
You can play back all the tracks in the playback area repeatedly.
Press the main unit REPEAT/INTRO CHECK [PITCH] button or
the remote REPEAT button to turn the repeat playback function
ON/OFF.
Repeat ON (REPEAT indicator appears)
All tracks are played back repeatedly.
Repeat OFF (no indicator)
Repeat playback is OFF.
NOTE
With data CDs, during folder playback all tracks within
the current folder will be played back repeatedly. During
program playback, all tracks within the program will be
played back repeatedly.
If the repeat playback function is turned ON during
playback, playback continues as is until the end and then
playback continues from the beginning.
If repeat playback is turned ON when stopped, repeat
playback begins when the PLAY/PAUSE button is pushed.
The repeat playback function’s ON/OFF state is retained
even when the power is turned OFF.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200BT in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info