656212

Tanita AB-140M - Abdominal Fat Analyser Manual

10
Zoom out
Zoom in
Previous page
1/19
Next page
19
How to Use
Commencing fat measurement
Press the ‘ ’ key.
1.Trunk fat % is displayed as .
(The moves as shown in the diagram at
right.)
2.The impedance meter buzzer sounds twice when
measurements are complete (beep, beep).
Please do not move the impedance meter or main
unit until results have been displayed (the impedance
meter and main unit transfer data).
9
18
How to Use
Preparing to take fat measurements
1.Wet the area of the abdomen to which electrodes
will be attached.
2.Place the impedance meter across the navel of
the subject with the electrodes facing down.
*The impedance meter can be oriented in either
direction.
3.The impedance meter detects the subject’s body and a buzzer will sound (beep).
4.Align the positioning line on the impedance meter
with the laser to adjust the position.
8
*Blue print in display illustrations indicates parts that illuminate or flash.
Warning
Do not direct the laser directly towards the
eyes as this may cause damage to eyesight.
Please…
To wet, wipe lightly with moistened cotton
wool or other cloth.
Please…
Check that the green Power LED is illuminated when positioning the impedance meter.
*The impedance meter Power LED will automatically turn off when more than approximately 10 minutes
passes between the LED coming on and the impedance meter being placed on the abdomen.
Please…
Do not connect together two or more units as this may cause malfunctions.
Have the subject breathe normally during measuring.
Check that the Power
LED is illuminated.
For Your Reference
Infrared communication may not be possible when:
• the unit is set up outdoors or in direct sunlight
• clothing or other items come between the main unit and the impedance meter
• lighting is positioned close by
• remote controllers for televisions, etc., are used near the impedance meter or main unit
• the batteries have expired
Measuring
standard mode (cont’d)
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita AB-140M - Abdominal Fat Analyser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita AB-140M - Abdominal Fat Analyser in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info