687778
45
Zoom out
Zoom in
Previous page
1/50
Next page
Operating the Receiver
45
5 Operating the Receiver
Check the transmitter and receiver are working properly each time before the equipment is
put into operation.
Switching the receiver on/off and setting the volume
Turn the volume control towards ON". The Power LED lights up green. The receiver is now ready to
operate.
Set the required volume using the volume control.
The Power LED turns orange when the battery charge becomes too low.
Selecting a channel
Press the channel selection button to select the required channel A, B, C, or D. The channel cur-
rently selected is indicated by the corresponding LED.
The transmitter and receiver must be set to the same channel.
Scanning channels
Press the channel selection button, several times if necessary, to select SCAN. The SCAN LED
lights up, another LED indicates the channel currently active. The current channel switches to the next
one every 5 seconds. In this way, you can monitor several transmitters, set to different channels, on
one receiver.
Save−energy mode
Set the LCD switch to OFF". Only audio signals are then transmitted. It is recommended to switch off
the LCD when operating with battery power.
Regulating the brightness
Press the Brightness + or button to adjust the brightness of the LCD to your specific needs.
Operating on a television set
The audio and video signals can be transmitted to a television or video recorder.
Plug the black jack plug on the audio/video cable in the AV OUTPUT socket and the yellow, white and
red phono plugs in the correspondingly coloured sockets in the input unit. For further information, refer
to the operating manual provided with the respective device.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCF268 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCF268 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info