687778

Switel BCF268 Manual

44
Zoom out
Zoom in
Previous page
1/50
Next page
Operating the Transmitter
44
4 Operating the Transmitter
Check the transmitter and receiver are working properly each time before the equipment is
put into operation.
Switching the transmitter on/off
1. Set the Power on/off switch to ON". The Power LED lights up green. The transmitter is now
ready to operate.
The power LED turns orange when the battery charge is too low.
2. Select CAMERA, AUTO or AV operating mode in order to transmit the noise and video signals
from the area being monitored or AV INPUT signals to the receiver.
3. Position the transmitter in a good position for the monitoring tasks required and align the lens to
the area to be monitored.
4. To switch the transmitter off, set the Power on/off switch to OFF".
Selecting the transmission mode
Select the operating mode required using the selection switch:
CAMERA − Audio and video signals from the area being monitored are transmitted continuously to the
receiver.
AUTO − Audio and video signals are only transmitted to the receiver when a specific noise level is ex-
ceeded.
AV − The transmitter transmits audio and video signals fed via the AV INPUT socket. These can be
signals from DVD players, cameras, etc. Plug the black jack plug on the audio/video cable in the AV
INPUT socket and the yellow, white and red phono plugs in the correspondingly coloured sockets in
the output unit. For further information, refer to the operating manual provided with the respective de-
vice.
Selecting a channel
Press the channel selection button to select the required channel A, B, C, or D. The channel cur-
rently selected is indicated by the corresponding LED.
The transmitter and receiver must be set to the same channel.
Night vision
The transmitter is equipped with 10 infra−red diodes. This enables the transmission of pictures from
areas which are not illuminated. The night vision function is activated automatically when the light
conditions make it necessary.
When the night vision function is activated, the screen display on the receiver turns to black
and white.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCF268 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCF268 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info