664347
8
Zoom out
Zoom in
Previous page
1/11
Next page
1. Connect the appliance to a suitable socket outlet. Water tank indicator
illuminates to indicate that the unit has been connected to the power supply
2. Set temp setting knob to desired position according to above ironing temperature
setting guide or fabric setting chart. Heating indicator light on iron unit will turn on to
indicate that the steam chamber being heated up. When heating indicator light turns
off, it indicates that desired temperature has been reached. It is ready for dry
ironing. During use, it is normal that heating indicator light will cycle from on to off
,and then off to on. This shows that steam chamber automatically keeps
temperature constant.(For every first time use,it should be pre-heated for about 3
minutes)
3. After use, put iron unit back onto the base unit again, turn temperature control dial
to“MIN”,
4. Unplug the appliance from main socket .
Note: When changing your Temp setting from higher setting to lower, it is proposed
that not to start ironing immediately since it may cause burns to your fabrics.
Please wait until heating indicator light turns on, then turn off.
8
Dry ironing
How to use your steam generator
Follow the steam ironing process, and then hold the iron
in vertical position between 5cm and 15cm away from
the hanged fabrics. (Fig.6) Press the steam button, and
then will create vertical steam. This feature is especially
used for removing creases from hanging clothes and
curtains. Never do this while garment is being worn!
Notes on vertical steaming:
1. Never block the steam hose.
2.
Do not use the appliance continuously for
more than 2 minutes. Otherwise, water may leak
from sole plate
Vertical steam ironing
Fig.6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI9030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9030 in the language / languages: English as an attachment in your email.

The manual is 6,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info