Manual Swan SI9030 (page 6 of 11) (English)

664347

Zoom out

Zoom in

1/11

1. Check if the rating indicated in the rating plate

corresponds to the mains voltage in your home.

2. Press handle button to lay handle down. Fig.1

3. Remove the protective foil or sticker or card from

the soleplate.

4. Fully unwind and straighten the power cord and

the supply hose.

5. Place the appliance on a stable, level and horizontal

surface such as an ironing board.

6. Place the iron onto the iron rest plate horizontally at the base unit.

Prepare the appliance for use:

1. Press the water tank lock upwards and

slide the detachable water tank

outwards from the base.

Fig.2

2. Take the filter upwards out from the

water fill hole.

Fig.3

3. Fill the water tank up to or below the

“MAX” fill line with clean tap water. Fig.4

4. Replace filter back into water filling hole.

5. Replace the water tank into the base

unit again. It will be locked in place with

the base unit until a “click” sound is

heard.(Water tank

indicator light will light up to indicate that

water tank and filter have been installed

in place if power ON) Fig.5

6. Always pour out the remaining water

after use.

Note: When the water level reaches a low

level or empty, pump sound will change

to indicate refilling is needed. Stop using

the appliance immediately and refill

water tank as the above methods.

Fill water tank

How to use your steam station

Fig.1

Fig.2

Fig.3 Fig.4

Fig.5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9030 in the language / languages: English as an attachment in your email.

The manual is 6,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Swan SI9030 Manual

Product: