628327
12
Zoom out
Zoom in
Previous page
1/22
Next page
Manuale Utente User manual Macchina caffè modello SOPHIA
ed 2014-01 Pag 12 di 22
Con riserva di modifica - Specification subject to change
Never touch coffee groups, boilers, metal pipes, spouts, steam and hot water valves and wands. They are
hot and could cause burns.
Attention: never hold your hands under the brewing group, the filter holder, the steam and hot water wands.
Hot drinks, hot steam and hot water are dispensed. Danger!
Allow the machine to cool before putting on or taking off parts
To protect against electric shock do not immerse any part of the machine, as well as cord and plugs in water
or other liquid.
To reduce the risk of electrical shock, do not touch the machine with wet parts of your body (i.e. your hands).
Before carrying out any maintenance operations turn the machine to “OFF”, disconnect it from the mains and
allow to cool.
Do not operate any appliance with a damaged cord, plugs, or after the appliance malfunctions or has been
damaged in any manner. Do always contact the authorised technical service.
Before disconnecting the plug from the wall outlet, turn the machine off.
To ensure efficient and correct operation it is essential to follow the manufacturer’s instructions concerning
the periodic maintenance carried out by the authorized service technician.
All maintenance must be carried out exclusively by authorized service technicians.
All spare parts must be original parts or parts authorized by the manufacturer.
Never use the machine without water. This might cause serious damage to the machine and reflect also to
safety risks.
Do not leave such packing items as plastic bags, styrofoam, nails, etc. around because children or other
people could get hurt or damaged.
Installation
The espresso machine SOPHIA is to be installed to comply with the applicable
federal, state or local plumbing codes having jurisdiction.
The manufacturer has tried to foresee all possible safety devices to ensure the safety of the users.
Anyhow different conditions of installation or of equipment moving can cause situations which cannot be
controlled or foreseen. Therefore it’s absolutely necessary to evaluate all remaining risks and to care about
the following:
Installation and maintenance must be carried out by technicians and service providers authorised by
the manufacturer.
Any defect or discrepancy has to be notified immediately to the authorised persons for installation
and maintenance.
A residual current device (RCD) having a rated residual operating current not exceeding 30mA must
be installed.
This machine is safe only when it has been correctly connected to an efficient grounding /earthing
system, implemented in accordance with the current safety regulations.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SV Italia SAB Sophia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SV Italia SAB Sophia in the language / languages: English, Italian as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info