453444
6
Zoom out
Zoom in
Previous page
1/23
Next page
4-6 SHAFT DRIVE
SECONDARY GEAR SHIMS ADJUSTMENT
BACKLASH
NOTE:
* Hollow portion
A
of the secondary driven bevel gear assembly
faces inside.
* It is not necessary to apply SUZUKI BOND 1207B to the
matching surface at this stage.
Install the secondary drive bevel gear assembly with the re-
moved shims and tighten the bolts to the specified torque.
! Secondary drive bevel gear bearing retainer bolt:
23 N
.
m (2.3 kgf
.
m, 16.5 lb-ft)
NOTE:
When replacing the secondary drive and driven bevel gears, in-
stall the removed shims to the secondary drive bevel gear as-
sembly and tighten the bolts to the specified torque.
Install the secondary driven bevel gear assembly with removed
shims, the driven bevel gear bearing and secondary gear case.
NOTE:
Do not install the O-ring on the driven gear housing at this stage.
O-ring is installed after backlash and tooth contact are correct.
Measure the backlash as follows.
Set-up a dial gauge as shown in photo.
# 09900-20606: Dial gauge (1/100 mm, 10 mm)
09900-20701: Magnetic stand
Tighten the secondary bevel gear case bolts and secondary
driven bevel gear bolts to the specified torque.
! Secondary bevel gear case bolt:
22 N
.
m (2.2 kgf
.
m, 16.0 lb-ft)
Secondary driven bevel gear bolt:
23 N
.
m (2.3 kgf
.
m, 16.5 lb-ft)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suzuki VL 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suzuki VL 800 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suzuki VL 800

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 12 pages

Suzuki VL 800 User Manual - English - 6 pages

Suzuki VL 800 User Manual - English - 19 pages

Suzuki VL 800 User Manual - English - 14 pages

Suzuki VL 800 User Manual - English - 20 pages

Suzuki VL 800 User Manual - English - 15 pages

Suzuki VL 800 User Manual - English - 11 pages

Suzuki VL 800 User Manual - English - 17 pages

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - German - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info