704206
33
Zoom out
Zoom in
Previous page
1/52
Next page
80-0067-00-MO-RevJ 2019-01-30 SunTech CT40 User Manual | 33
NOTE: IR temperature readings provided by this device are closely aligned to core temperatures rather than an axillary
or rectal reading. Take this into account when reviewing readings.
To change the measurement units from °C to °F or vice-versa, ensure that the thermometer is on by pressing the
START button. Then press the MODE and MEM buttons on the thermometer simultaneously for 3-4 seconds.
The SunTech Touchless Thermometer can also be used to measure the temperature of an object, such as a vessel
containing liquid, or food. To use Object Mode, ensure that the thermometer is turned on by pressing the START
button. Press the Mode Button briefly. The Object Mode icon will then appear in the device display. Place the
thermometer 2-3 cm from the desired measuring point on the object and press the START button. Hold thermometer
in place until you hear a long beep. The temperature will be displayed on the screen.
NOTE: Remember that surface temperature and inner temperature of an object can vary greatly.
*Touchless Thermometry module is not available in all countries. Contact SunTech to find out if this feature is available
in your area
9. Using SunTech CT40 EMR and Memory Functions
Section 4 “Good to Know Before You Begin” provides some basic information about the SunTech CT40’s EMR and
memory functions. Here are more details about how these functions work.
Barcode Scanner Setup
If your scanner was purchased from SunTech Medical Inc, they are provided, programmed for use with the CT40. If
the scanner is not working with the CT40, scan the barcode below with the scanner plugged into any powered USB.
If your scanner was not purchased from SunTech Medical Inc, refer to the user manual of your scanner to ensure the
scanner is programmed to provide a carriage return at the end of a reading.
Memory Mode
When you power up the unit, the memory identifier appears at the top of the display beside the Memory Icon .
This is the number that will be associated with the next set of measurement results that are sent to the device
memory.
Press the Memory Button on the front of the device to save results to memory. The Memory Icon, check
mark icon and all values that are displayed on the screen (at the time the button is pressed) will flash before the
results are saved. The following values can be saved to memory.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SunTech CT40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SunTech CT40 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SunTech CT40

SunTech CT40 User Manual - German - 49 pages

SunTech CT40 User Manual - Dutch - 52 pages

SunTech CT40 User Manual - French - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info