704206
32
Zoom out
Zoom in
Previous page
1/52
Next page
80-0067-00-MO-RevJ 2019-01-30 SunTech CT40 User Manual | 32
NOTE: If the temp probe is returned to the probe well before the “long beep” is heard, no temperature measurement will
be displayed.
NOTE: Be sure to eject the used probe cover into an approved bio-hazard container before attempting to place the probe
back in the isolation chamber.
Other FILAC® 3000 Temperature Settings
Your device’s FILAC® 3000 thermometer operates in several different modes.
Quick Mode is an oral predictive measurement mode that provides a fast reading. Quick Mode allows you to rapidly
identify patients with normal body temperatures. If the patient temperature is outside of the “normal” range, the
FILAC® 3000 electronic thermometer will automatically switch into its standard predictive mode to provide a more
accurate reading. Quick Mode is indicated by a rabbit icon on the display . Quick Mode is not available when in
Cold Mode or in Direct Mode.
The FILAC® 3000 thermometer normally operates in predictive mode to provide fast and accurate temperature
measurements. However, in instances when no measurement site is detected, or the temperature does not stabilize,
the thermometer will automatically switch to Direct Mode . Additionally, the FILAC® 3000 electronic thermometer
will automatically switch into Direct Mode if the ambient temperature is greater than 35°C (95°F). If this happens, you
will hear two short beeps and see the Direct Mode turtle icon appear . This icon will be continuously displayed
whenever the thermometer is functioning in Direct Mode. The Direct Mode auto feature is always functional for both
the Red or Blue isolation chamber/probe combinations.
Cold Mode can be selected if a patient’s body temperature is expected to be lower than normal, such as when he is
coming out of surgery. Cold Mode is activated by pressing the Site Selection button and °C/°F button simultaneously
on the temp module. When selected, the Cold Mode snowflake icon is displayed, and the probe will preheat to
33°C (91°F). The accuracy and measurement time of Cold Mode measurements are equivalent to standard prediction
measurements at the respective body sites.
Touchless Thermometry Module*
If your device comes with the optional touchless thermometry module, you can easily and quickly measure the
patient’s temperature using a touchless infrared temporal thermometer. To use, remove the thermometer from the
holster on the side of the SunTech CT40. Touch the thermometer’s START button to turn on the touchless
thermometer.
On your SunTech CT40 display, you will see the Human Thermometry Mode icon selected with the arrow pointing to
the side of the head . Hold the thermometer probe 2 cm to 3 cm from the patient’s temple and press the START
button on the back of the thermometer. The reading is complete when you hear a beep, and the temperature
measurement will appear on your device display. Place the thermometer back in the device holster.
NOTE: Be sure to wipe away any sweat from the area around the temporal artery and be sure to remove eyeglasses and
push hair away from measurement site before initiating a measurement.
NOTE: The area just behind the ear lobe can be used as an alternative measurement site to the temporal artery.
NOTE: The SunTech Touchless Thermometer should not be used near sources of heat or cold, such as a heater or air
conditioner vent. Also, do not use outdoors. Use this product in a room where the temperature is between 16°C and
40°C (61°F and 104°F).
NOTE: If patients are subject to a significant change in temperature from outside to inside, the patient should be
allowed to acclimate for approximately 15 minutes before using the touchless thermometer.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SunTech CT40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SunTech CT40 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SunTech CT40

SunTech CT40 User Manual - German - 49 pages

SunTech CT40 User Manual - Dutch - 52 pages

SunTech CT40 User Manual - French - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info