767596

Suntec Klimatronic Heat Stream Spa 2000 design LED Manual

16
Zoom out
Zoom in
Previous page
1/114
Next page
•To avoid electric shocks, never immerse the unit, it’s
cord and plug into water or other liquids.
•The appliance needs to be at least 1,2m apart from
the floor.
•The appliance is to be supplied through a residual
current device (RCD) having a rated residual
operating current not exceeding 30 mA.
Warning: In order to avoid overheating, do
not cover the heater!
Assembly
Please remove all packaging materials and check all components for visible damage. In the event of damage,
please do not proceed with the assembly and contact your point of sale. The following assembly steps refer to
the figures at the beginning of this manual.
1. Select a wall that is suitable for installing the appliance. The wall must be stable, straight and not be
made of flammable material, e.g. wood or plastic. The min. distances as shown in fig.1 must be followed.
2. Use the enclosed template to mark the holes to be drilled on the wall (see fig.2a). Bath heater and towel
rail must be at least 18cm apart. The minimum distance between the drill holes is already marked on
the template. If you want a larger distance, you can cut the template into two parts. Please make sure
that the markings are straight. Drill seven holes with a diameter of 6mm each into the wall.
3. Please insert one peg per hole into the wall and push them in with a hammer until the pegs no longer
stick out from the wall (see fig.2b).
4. Insert two screws into the positions marked in fig.3. The screws must protrude 2.5mm from the wall to
support the unit.
5. Now place the unit against the wall (see fig.4) and fix it at the uppermost drill hole with a screw (see
fig.5).
6. Fix the two towel rails to the corresponsing bar by using four screws (see fig.6).
7. Fix the completed towel rail to the wall using four screws on the previously drilled holes (see fig.7).
8. Cover the bar of the towel rail with the cover (see fig.8). The appliance is ready for operation (see fig.9).
Operation
•Operating voltage: 220-240V~, 50-60Hz, 2000W
•Control panel:
On/Off Program setting
Heat setting Program selection: P1, P2, P3, P4,
P5, UP
Open window detector Value increase timer/temperature
Timer Value decrease timer/temperature
LED display
Indicator
Description
Heating 2000W
Heating 1000W
Frost protection
Open window sensor
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec Klimatronic Heat Stream Spa 2000 design LED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec Klimatronic Heat Stream Spa 2000 design LED in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info