664820

Suntec Klimatronic ENERGIC plus 9.0 Manual

20
Zoom out
Zoom in
Previous page
1/192
Next page
20
Place the ENERGIC unit in the shade if possible and in a cool place in order to increase efficiency and to
avoid overheating. At an ambient temperature of over 35°C, the ENERGIC unit may deactivate. If this
occurs continuously, we recommend you temporarily use the INDOOR OPERATION of the ENERGIC
unit. We recommend that a drainage hose for condensation water be connected.
Set the function to „COOLING“. The settable temperature range is between 17°C and 30°C. This can be
set using the temperature control.
The air with high oxygen content cooled by the ENERGIC unit is led into the room via the air hose. This
can be executed e.g. via a tilted window, a door or wall aperture. Make sure that no warm outside air can
enter the room. We recommend that a drainage hose for condensation water be connected. For effective
cooling, we recommend our selection of various accessories which reduce or prevent entry of warm air
into the room, or via the remote control.
Using the „Comfort Control- S Kit“ you can also control the ENERGIC unit from inside using the remote
control.
Note: After switching on, or over, the ventilator operates, but the compressor only starts after the control
lamp has flashed for 3 minutes. Cooling effect may require a further 10 minutes. Further information is
available under the part „Troubleshooting“.
HEATING
On cold days it is recommendable to start the ENERGIC unit early in order to get a warm room.
For the heating function and to improve the heating effect and avoid lower temperatures (lower than
17°C) we recommend you remove the rubber plug from the condensation water outlet and allow the
condensation water to leak out of the ENERGIC unit using the drainage hose. However, the drainage
hose does not have to be connected in the heating mode. Please make sure that the condensation
water outlet is closed with the rubber cap during operation. In such a case, proceed analogously to the
emptying of the water tank in the cooling function.
The heating function of the ENERGIC unit must not be operated at a room temperature of more than
23°C or less than 7°C. The ENERGIC unit can also be operated with heating function, if the outside
temperature is lower than 7°C. However, you must then ensure that the ENERGIC unit is operated
inside and the room temperature is at least 7°C.
HEATING IN INDOOR OPERATION
The ENERGIC unit is in the room to be heated.
Connect the air hose and the air outlet grid to the ENERGIC unit as displayed in the illustration; the air
hose connection piece and air outlet grid need to be exchanged.
Caution: In the heating mode, separate setting of the ventilator is not provided, since the highest
ventilation level is already preset to avoid overheating of the unit.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec Klimatronic ENERGIC plus 9.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec Klimatronic ENERGIC plus 9.0 in the language / languages: All languages as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info